Do you have a question about the Kenmore 1652 and is the answer not in the manual?
Type | Mechanical |
---|---|
Built-in Needle Threader | No |
Free Arm | Yes |
Stitch Selection | Dial |
Included Accessories | Needles, Bobbins, Screwdriver, Spool Cap, Seam Ripper |
Identifies parts on the front of the machine.
Identifies parts on the back of the machine.
Covers installing the machine, light, and connecting power.
Table for selecting needles/threads and proper needle placement.
Instructions for removing the bobbin case from the shuttle.
Step-by-step guide to winding a bobbin.
Procedure for placing the bobbin into the bobbin case.
Guide for threading the upper part of the sewing machine.
Covers picking up bobbin thread and adjusting presser foot pressure.
Instructions for stitch settings and basting technique.
Guide for balancing upper and lower thread tensions.
Covers inserting/removing material and using the feed dog.
Instructions for attaching and detaching presser feet.
Settings for zigzag width, pattern discs, and reverse pattern discs.
Examples and usage of decorative stitches.
Instructions for darning with or without the presser foot.
Techniques for attaching buttons and creating blind hems.
Step-by-step guide for creating buttonholes on specific models.
Instructions for models 96/1750 and general tips.
Guide for making buttonholes on model 1654.
Techniques for applique, sewing lace, and mending tears.
Methods for overcasting, monogramming, and sewing stretch fabrics.
Instructions for setting, threading, and selecting thread for a double needle.
Techniques for stitching and turning corners with a double needle.
Guidelines for sewing synthetic fabrics and plastic films.
Instructions for replacing the machine's drive belt.
Step-by-step instructions for machine cleaning and oiling.
Guide to resolving sewing problems.
Fine-tuning the machine for optimal stitch quality.
Illustrated list of available machine parts.
Information on how to order replacement parts.
Contact information for service, repair, and parts.