CHANGING NEEDLE
Raise _is bar to its highest p_itlon by
turning the hand w_l toward you. Loosen
the _e clamp screw, Holding the _le
with _ _ __ _ _o dip the
needle into the _tebar. When It is in as far
as tt will go, tighten the needle €l_p screw,
PREUER UVER
PruNr foot lever _ a two _itlon lift.
In order to place haaw fabric under the
presser foot or to cha_ the _ foot
raise _ _ foot lever to its maximum
upward _tl_ as shown.
EPARATION R DiNG
Swing away spool pin fully to the back of
machine. Place spool of thread on the e_
pin and cover with cap for smith supply of
thread;_
Extra spool pin , is provided on top of
machine. This is used only when winding
bobbin and sewing with double needle.
Pull it up when using.
9
To Next Page
Loading...
