3_
Place guide plate onto machine so it fits i,
place with plnlengeer tn the center of arc
h_de of the tmmp_ete. Make sure guide
blocks are inserted In guide slotsl
,
Carefully mark the buttonhole length on
your garment.
Pick up bobbin thread through guide pla!e
by turning hand wheel. Piece feb_
between presser foot and guide plate,
Align marked buttonhole with ¢entw
marking 0n foot, Line up edge of fabric
with greduatlone on both eddm of the
guide plate, If you wish elt buttonho4es to
be 1/2" from edge of fabric, for example,
line up fabdc with 1/2" markings each
time you start e buttonhole,
Now you are ready to sew the buttonhole
you ulected, Your buttonhoter d_ all
vor you.
46
To Next Page
Loading...
