7'. Select WASH "rEMP
Cool
Lights
Cool •
Wash Temp
Once you select a cycle, select the desired wash temperature
by turning the Wash Temp knob to the desired setting.
Always read and follow fabric care label instructions to avoid
damage to your garments.
Wash Temp Suggested Fabrics
Hot
Some cold water is added to save Whites and pastels
energy. This may be cooler than Durable garments
your hot water heater setting.
Heavy soils
Warm
Some cold water may be added, Bright colors
so this wJJJbe cooler than what Moderate to light soils
your previous washer provided.
Cool Lights
Warm water is added to assist in Colors that bleed or
soil removal and to help dissolve fade
detergents. Light soils
Cool Darks
Warm water is added to assist in Dark colors that bleed
soil removal and to help dissolve or fade
detergents.
Cold
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Dark colors that bleed
or fade
Light soils
8. Select options (on some models)
One Two
Rinse Rinses Off On
@ @ @ ®
C
Rinse Fabric Softener
Select the desired cycle options. If you are using fabric
softener, be sure to select Fabric Softener "On" option.
9. Press START/PAUSE/Unlock Lid
to begin wash cycle
_ START
PAUSE
UNLOCK LID
CANCEL
HOLD 3 SEC
Press the START/PAUSE/Unlock Lid button to start the wash
cycle. When the cycle has finished, the Cycle Complete status
light wJJJlight. Promptly remove garments after cycle has
completed to avoid odor, reduce wrinkling, and rusting of
metal hooks, zippers, and snaps.
Unlocklng the lld to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/PAUSE/Unlock Lid; the lid will unlock once the
washer movement has stopped. This may take several minutes
Jf the load was spinning at high speed. Then close lid and press
START/PAUSE/Unlock Lid again to restart the cycle.
If JJd Js left open for more than 10 minutes, the water wJJJpump
out automatically.
10
To Next Page
Loading...
Need help?
General
