How to fix a Kenmore Dishwasher when the cycle does not start?
If the Kenmore Dishwasher cycle doesn't start, several factors could be at play. First, ensure the dishwasher is powered on by pressing the power button. Check your indoor fuses, and make sure the water inlet tap is fully open. Also, verify that the dishwasher door is completely closed. Lastly, inspect the water inlet hose and machine filters for any clogs.
What to do if water remains inside my Kenmore 263.1458 Dishwasher?
If water remains inside the Kenmore Dishwasher, start by checking the drain hose for clogs or twists, and clean or untwist it as needed. Next, clean the filters. Also, make sure that the cycle is finished. Note that it is normal to have some water remain in the machine below the filters.
Why are the dishes not drying in my Kenmore 263.1458?
If your Kenmore Dishwasher isn't drying dishes properly, first, make sure you've selected a cycle with a drying option. If so, try increasing the rinse aid dosage setting.
Why does my Kenmore 263.1458 stop during washing?
If your Kenmore Dishwasher stops during washing, examine the electrical supply and check the water tap.
What to do if partial food wastes remain on the dishes in my Kenmore Dishwasher?
If your Kenmore Dishwasher leaves partial food wastes on the dishes, consider these points: avoid overloading the dishwasher to ensure proper water spray coverage. Make sure that dishes are not leaning against each other. Use the correct amount of detergent and select the most appropriate wash cycle. Also, clean the spray arms and check that the drain hose and filters are correctly fitted.
Why does my Kenmore 263.1458 leave whitish stains on dishes?
If you find whitish stains on dishes after a Kenmore Dishwasher cycle, it might be due to insufficient detergent. Ensure you're using the correct amount of detergent, as instructed in the cycle table.
Why does rust form on the dishes in my Kenmore Dishwasher?
If you notice rust stains forming on the dishes after using your Kenmore Dishwasher, it could be due to the stainless-steel quality of the dishes. Use only dishwasher-proof sets. Another potential cause is improper grounding of the electrical supply; consult a qualified electrician immediately in this case.
Why does detergent remain in the detergent compartment of my Kenmore 263.1458 Dishwasher?
If detergent remains in the detergent compartment of your Kenmore Dishwasher, ensure the compartment is dry before adding detergent. Also, make sure that items in the dishwasher do not block the detergent compartment.
Why is my Kenmore Dishwasher making shaking and hitting noises?
If you hear shaking and hitting noises during a wash operation with your Kenmore Dishwasher, it's likely that the spray arm is hitting the dishes in the lower basket. Try moving or removing any items that might be blocking the spray arm.
What to do for a water inlet system failure in Kenmore 263.1458 Dishwasher?
To address a water inlet system failure in your Kenmore Dishwasher, first ensure the water inlet tap is open and water is flowing. If the issue persists, separate the inlet hose from the tap and clean the filter of the hose. If the error continues, contact for service.
Details how to load the upper rack with plates, cups, glasses, and utensils.
Details how to load the lower rack with pots, lids, plates, and cutlery sets.
Covers power, cycle selection, delay, start/pause, and key status indicators.
Details how to load the upper rack with plates, cups, glasses, and utensils.
Details how to load the lower rack with pots, lids, plates, and cutlery sets.
Covers power, cycle selection, delay, start/pause, and key status indicators.
General| Brand | Kenmore |
|---|---|
| Model | 263.1458 Series |
| Category | Dishwasher |
| Language | English |
To Next Page
