EasyManua.ls Logo

Kenmore 2801*010 - User Manual

Kenmore 2801*010
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Use & Care Guide
Manual de Uso y Cuidado
Guide d’Utilisation et d’Entretien
English / Español / Français
Table of Contents / Índice / Table des matières......2
Kenmore®
Top-Loading High Efficiency
Low-Water Washer
Lavadora de alto rendimiento y carga superior,
con nivel bajo de agua
Laveuse haute efficacité à faible consommation
d’eau avec chargement par le dessus
* = color number, número de color, le numéro de la couleur
Models/Modelos/Modèles: 2800*010, 2801*010
P/N W10338685B
Sears Brands Management Corporation
Hoffman Estates, IL 60179 U.S.A.
www.kenmore.com
www.sears.com
Sears Canada Inc.
Toronto, Ontario, Canada M5B 2B8
www.sears.ca
Designed to use only HE High Efficiency
detergents.
Conçue pour l’utilisation d’un détergent
haute efficacité seulement.
Diseñada para utilizar solamente
detergentes de alto rendimiento (HE).

Questions and Answers

  • M
    Mark EverettAug 8, 2025
    How to fix an unbalanced load in my Kenmore 2801*010 Washer?
    • R
      Rachel ThomasAug 8, 2025
      To fix an unbalanced load in your Kenmore Washer, load garments in loose heaps evenly around the washplate, ensuring not to load garments directly over the center of the washplate. Avoid adding wet items to the washer or adding more water to the basket, as this could unbalance the washer. For oversized, non-absorbent items like small comforters or poly-filled jackets, use the Bulky cycle. Also, washing smaller loads can reduce imbalance.
  • D
    David WilliamsAug 18, 2025
    Why is my Kenmore 2801*010 Washer vibrating or off-balance?
    • K
      Kimberly LeeAug 19, 2025
      Your Kenmore washer might be vibrating or off-balance due to several reasons. The feet may not be in firm contact with the floor or locked properly, the washer might not be level, or the load could be unbalanced. Make sure the front and rear feet are firmly on the floor, the washer is level, and the jam nuts are tight. Check the floor for flexing or sagging; consider using a 3/4" (19 mm) piece of plywood if the flooring is uneven. Also, load garments loosely and evenly around the washplate, avoiding placing them directly over the center. Adding wet items or too much water can also cause imbalance.
  • D
    Dr. Megan Mejia MDAug 28, 2025
    What to do if my Kenmore Washer is not level?
    • D
      David KingAug 28, 2025
      If your Kenmore Washer is not level, check the floor for flexing or sagging. If the flooring is uneven, placing a 3/4" (19 mm) piece of plywood under the washer can reduce sound. Ensure that the front and rear feet are in firm contact with the floor and that the washer is level for proper operation. The jam nuts must be tight against the bottom of the cabinet.

Summary

WASHER SAFETY

IMPORTANT SAFETY INSTRUCTIONS

Essential precautions to reduce fire, electric shock, or injury.

WHATS NEW UNDER THE LID?

Automatic Load Size Sensing

Washer automatically adjusts water level to load size for efficient washing.

CONTROL PANEL AND FEATURES

USING YOUR WASHER

Load laundry into washer

Instructions on properly loading garments around the washplate.

Add laundry products to dispenser

Guidance on adding HE detergent, bleach, and fabric softener to dispensers.

Start and select cycle settings

Steps to power on, select cycles, and adjust settings like temperature and spin.

WASHER MAINTENANCE

TROUBLESHOOTING

Washer Not Performing as Expected

Addresses issues like not filling, stopping, or not cleaning properly.

Washer Not Draining or Spinning

Load Dry Spots and Rinsing Issues

Cleaning and Stain Removal Issues

Temperature and Detergent Issues

Fabric Damage Causes

Kenmore 2801*010 Specifications

General IconGeneral
BrandKenmore
Model2801*010
CategoryWasher
LanguageEnglish

Related product manuals