Setting Spool Pins
\ Spool pin felt
II L 0°°'0'n
Adjust the Presser Foot Lever
H=gh
position
\
Norrnal
position • ,
Presser foot _-_-_,';;'
lever Normal up
High position
pos[tiof_'_ k,
• Free-Arm Sewing: the Removable Extension Table
To remove:
To Remove the Extension Table (for free-arm sewing)
1, Grip the table with your index finger,and thumb, as shown.
2. Pull gently to the left. The extension table will snap out.
J
Spool Pins are packed in accessory box.
Screw spool pins in place securely with a
screw d river.
Position sppo! pin felts as shown in illustra-
tion.
J
The Presser Foot Lever raises and lowers
your presser foot.
You can raise it about 1/4" higher than
normal up position for easy removal of the
presser foot or to help you place heavy
fabrics under the presser foot.
To Attach :
To Attach the Extension Table (for flat-bed sewing)
1. Insert the tab and the pin into their catches.
2. With your thumb and index finger, gently snap in.
To Next Page