Kenmore 400 series Use & Care Guide

Vacuum cleaner
picks up
moveable rugs
-or- floor nozzle
pushes too hard.
Suction too strong.
Slide the electronic suction control to a lower
power setting.
Cord won’t
rewind.
Dirty power cord. Clean the power cord.
Cord jammed. Pull out cord and rewind.
Vacuum cleaner
leaves marks on
carpet.
Wrong vacuuming pattern. See VACUUMING TIPS (page 12).
- 23 -
TROUBLESHOOTING

Kenmore 400 series Specifications

General

Bagged/Bagless	Bagged
HEPA Filter	Yes
Power Source	Corded Electric
Voltage	120V
Amps	12A
Included Tools	Crevasse tool, upholstery tool
Warranty	1 year limited