EasyManua.ls Logo

Kenmore 580.77157710 - User Manual

Kenmore 580.77157710
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Kenmore Elite®
Smart Room Air Conditioner
Aire Acondicionado Inteligente Para Habitación
Models/Modelos: 580.77157710 (15000 BTU)
580.77187710 (18000 BTU)
580.77247710 (25000 BTU)
Sears Brands Management Corporation
Hoffman Estates, IL 60179 U.S.A.
www.kenmore.com
MFL66921603
Use & Care Guide
Manual de Uso y Cuidado
SMART
CONTROL

Table of Contents

Questions and Answers

  • M
    Michael SimsAug 14, 2025
    Why does my Kenmore Air Conditioner not cool as it should?
    • J
      Jesus HensonAug 15, 2025
      Several factors can impact the cooling performance of your Kenmore air conditioner. Check that curtains, blinds, or furniture aren't blocking the front of the unit. Ensure the temperature control is correctly set by pressing the Decrease (v) button in COOL mode. Clean the air filter every 2 weeks. Allow the room to cool down after turning on the air conditioner. Also, check for open furnace floor registers and cold air returns, and inspect for iced-up cooling coils.
  • M
    Michelle BarronAug 18, 2025
    What to do if my Kenmore Air Conditioner does not start?
    • M
      Marissa CunninghamAug 18, 2025
      If your Kenmore air conditioner isn't starting, ensure it's fully plugged into the outlet. Check the power cord for a tripped current interrupter device and press the RESET button. If it won't stay engaged, stop using the unit and contact a qualified technician. Inspect your house fuse/circuit breaker box, replacing the fuse or resetting the breaker if needed. Make sure the temperature setting is lower than the room temperature. Note that a built-in delay prevents the compressor from restarting for 3 minutes if the unit was recently turned off and on.
  • R
    Rodney BensonAug 21, 2025
    Why is my room too cold with Kenmore 580.77157710 Air Conditioner?
    • H
      Hannah JohnsonAug 21, 2025
      If your room is too cold when using your Kenmore air conditioner, it's likely that the set temperature is too low. Try increasing the set temperature to a more comfortable level.
  • T
    Taylor HillAug 25, 2025
    Why does water collect in the base pan of my Kenmore Air Conditioner?
    • A
      Anthony CarneyAug 25, 2025
      Water collecting in the base pan of your Kenmore air conditioner is normal. It happens when moisture is removed from the air and drains into the pan. This occurs briefly in low-humidity areas and for longer periods in very humid areas.
  • T
    Thomas JohnsonAug 28, 2025
    Why does my Kenmore 580.77157710 Air Conditioner keep blowing fuses or tripping the circuit breaker?
    • D
      devin77Aug 28, 2025
      Your Kenmore air conditioner might be blowing fuses or tripping the circuit breaker due to several reasons. Too many electrical devices might be on the same circuit, so unplug or relocate some. If your unit is rated over 7.5 Amps, ensure it's plugged into a single circuit outlet. Avoid using an extension cord. Also, turning the unit OFF and ON too quickly can cause this issue; wait 3 minutes before restarting.
  • J
    Jessica WilsonAug 31, 2025
    How to fix Kenmore Air Conditioner freezing up?
    • W
      wrightrobertAug 31, 2025
      If your Kenmore air conditioner is freezing up, the cooling coils are likely iced over. This ice can block airflow, hindering the unit's ability to cool the room effectively. To resolve this, set the mode control to High Fan or High Cool to melt the ice.
  • W
    William EdwardsSep 3, 2025
    What to do if the Kenmore Air Conditioner remote will not operate?
    • J
      jennifer56Sep 4, 2025
      If the remote isn't working with your Kenmore air conditioner, first, ensure you're within 20 feet and a 120° radius of the unit's front. Remove any obstructions blocking the path between the remote and the sensor. Check the battery installation, ensuring correct polarity. Finally, reposition the unit or use an object to shield the sensor from direct sunlight.
  • J
    James SchmidtSep 7, 2025
    Why does my Kenmore 580.77157710 turn on and off rapidly?
    • A
      Austin SmithSep 7, 2025
      Your Kenmore air conditioner might be turning on and off rapidly due to a couple of reasons. If the outside temperature is extremely high, set the fan speed to the fastest setting for maximum cooling. Also, a dirty air filter can restrict airflow, so cleaning the air filter may resolve the issue.
  • B
    Breanna GeorgeSep 10, 2025
    What causes noise when Kenmore Air Conditioner is cooling?
    • D
      Dennis ArmstrongSep 12, 2025
      Noise during cooling with your Kenmore air conditioner can stem from a couple of sources. If the window is vibrating due to improper installation, refer to the installation instructions or consult with the installer. Alternatively, the noise may simply be the normal sound of air movement. If it's too loud, try setting the fan to a lower speed.

Summary

Safety Precautions

General Safety Warnings

Key safety warnings, including fire, explosion, and electrical hazards.

Installation and Operation Safety

Safe practices for installation, operation, and maintenance of the air conditioner.

Grounding and Refrigerant Safety

Specific safety guidelines for grounding and handling flammable refrigerant (R32).

Features and Benefits

Key Parts and Components

Identifies and describes the main components of the air conditioner unit.

Electrical Data and Receptacle Requirements

Details electrical ratings, plug types, and required wall receptacles for different BTU units.

Installation Requirements

Key Dimensions and Specifications

Provides physical dimensions and net weight specifications for the air conditioner.

Items Included and Tools Required

Lists all parts included in the package and necessary tools for installation.

Installation Instructions

Window Requirements and Cabinet Preparation

Guidelines for window size, clearance, and preparing the cabinet for installation.

Main Unit and Curtain Panel Installation

Step-by-step instructions for installing the main unit and attaching curtain panels.

Final Installation Steps and Assembly

Completing installation with foam, locking brackets, and front grille attachment.

How to Use

Control Panel and Remote Operation

Overview of the control panel, remote functions, and basic operation controls.

Modes, Settings, and Features

Details on operating modes, temperature control, filter reset, ventilation, additional features, and smart connectivity.

Remote Control Battery and Airflow

Instructions for remote battery installation and adjusting airflow direction.

Care and Cleaning

Air Filter Maintenance

Guidance on checking, cleaning, and maintaining the air filter for optimal performance.

Cleaning the Air Conditioner Unit

Instructions for cleaning the front grille, inlet grille, and the main cabinet.

Troubleshooting Guide

Understanding Normal Operation Sounds

Describes common sounds the air conditioner may make during normal operation.

Common Problems and Solutions

A guide to diagnosing and resolving common issues before calling for service.

Warranty Information

Kenmore Elite Limited Warranty Details

Outlines the terms, coverage, limitations, and exclusions of the product warranty.

Kenmore 580.77157710 Specifications

General IconGeneral
BrandKenmore
Model Number580.77157710
TypePortable Air Conditioner
Power Supply115V/60Hz
RefrigerantR410A
Energy Efficiency Ratio (EER)8.9
Voltage115 V
Cooling Capacity (BTU)12, 000 BTU
Exhaust Hose Diameter (inches)5 inches
Included AccessoriesRemote Control, Exhaust Hose, Window Kit

Related product manuals