EasyManua.ls Logo

Kenmore 580.77247710 - User Manual

Kenmore 580.77247710
42 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Kenmore Elite®
Smart Room Air Conditioner
Aire Acondicionado Inteligente Para Habitación
Models/Modelos: 580.77157710 (15000 BTU)
580.77187710 (18000 BTU)
580.77247710 (25000 BTU)
Sears Brands Management Corporation
Hoffman Estates, IL 60179 U.S.A.
www.kenmore.com
MFL66921603
Use & Care Guide
Manual de Uso y Cuidado
SMART
CONTROL

Table of Contents

Questions and Answers

  • K
    klinelisaAug 15, 2025
    Why does my Kenmore 580.77247710 Air Conditioner not cool as it should?
    • O
      obrienmaryAug 15, 2025
      Several factors can impact the cooling performance of your Kenmore air conditioner. Check that curtains, blinds, or furniture aren't blocking the front of the unit. Ensure the temperature control is correctly set by pressing the Decrease (v) button in COOL mode. Clean the air filter every 2 weeks. Allow the room to cool down after turning on the air conditioner. Also, check for open furnace floor registers and cold air returns, and inspect for iced-up cooling coils.
  • W
    Willie HaleAug 18, 2025
    What to do if my Kenmore Air Conditioner does not start?
    • E
      Emma WrightAug 18, 2025
      If your Kenmore air conditioner isn't starting, ensure it's fully plugged into the outlet. Check the power cord for a tripped current interrupter device and press the RESET button. If it won't stay engaged, stop using the unit and contact a qualified technician. Inspect your house fuse/circuit breaker box, replacing the fuse or resetting the breaker if needed. Make sure the temperature setting is lower than the room temperature. Note that a built-in delay prevents the compressor from restarting for 3 minutes if the unit was recently turned off and on.
  • D
    dawsonreneeAug 22, 2025
    Why is my room too cold with Kenmore Air Conditioner?
    • H
      Hailey SmithAug 22, 2025
      If your room is too cold when using your Kenmore air conditioner, it's likely that the set temperature is too low. Try increasing the set temperature to a more comfortable level.
  • C
    Christian BennettAug 26, 2025
    Why does water collect in the base pan of my Kenmore 580.77247710?
    • K
      Kent DavidsonAug 26, 2025
      Water collecting in the base pan of your Kenmore air conditioner is normal. It happens when moisture is removed from the air and drains into the pan. This occurs briefly in low-humidity areas and for longer periods in very humid areas.
  • J
    Jennifer SandovalAug 28, 2025
    Why does my Kenmore 580.77247710 Air Conditioner keep blowing fuses or tripping the circuit breaker?
    • W
      Walter HoltAug 29, 2025
      Your Kenmore air conditioner might be blowing fuses or tripping the circuit breaker due to several reasons. Too many electrical devices might be on the same circuit, so unplug or relocate some. If your unit is rated over 7.5 Amps, ensure it's plugged into a single circuit outlet. Avoid using an extension cord. Also, turning the unit OFF and ON too quickly can cause this issue; wait 3 minutes before restarting.
  • Z
    zimmermanrhondaSep 1, 2025
    How to fix Kenmore 580.77247710 freezing up?
    • D
      Dylan BrandtSep 1, 2025
      If your Kenmore air conditioner is freezing up, the cooling coils are likely iced over. This ice can block airflow, hindering the unit's ability to cool the room effectively. To resolve this, set the mode control to High Fan or High Cool to melt the ice.
  • S
    Stephanie MyersSep 4, 2025
    What to do if the Kenmore 580.77247710 Air Conditioner remote will not operate?
    • C
      Chelsea HernandezSep 4, 2025
      If the remote isn't working with your Kenmore air conditioner, first, ensure you're within 20 feet and a 120° radius of the unit's front. Remove any obstructions blocking the path between the remote and the sensor. Check the battery installation, ensuring correct polarity. Finally, reposition the unit or use an object to shield the sensor from direct sunlight.
  • M
    Mary GilbertSep 7, 2025
    Why does my Kenmore Air Conditioner turn on and off rapidly?
    • M
      Michelle MartinSep 7, 2025
      Your Kenmore air conditioner might be turning on and off rapidly due to a couple of reasons. If the outside temperature is extremely high, set the fan speed to the fastest setting for maximum cooling. Also, a dirty air filter can restrict airflow, so cleaning the air filter may resolve the issue.
  • R
    Ronald WalshSep 12, 2025
    What causes noise when Kenmore 580.77247710 is cooling?
    • T
      Thomas KramerSep 12, 2025
      Noise during cooling with your Kenmore air conditioner can stem from a couple of sources. If the window is vibrating due to improper installation, refer to the installation instructions or consult with the installer. Alternatively, the noise may simply be the normal sound of air movement. If it's too loud, try setting the fan to a lower speed.

Summary

Safety Messages and Warnings

Safety Alert Symbol Definitions

Explains safety alert symbols like WARNING and CAUTION and their meanings.

Electrical Requirements for Safety

Details critical electrical requirements for safe operation, including grounding.

Important Safety Instructions

General Safety Precautions

Operation and Maintenance Safety

Outlines safety guidelines for operating and maintaining the air conditioner.

Grounding and Hazard Warnings

Grounding Requirements

Explains the importance of proper grounding and connection procedures.

Fire, Explosion, and Health Hazards

Covers risks of fire, explosion, and health hazards related to product use and chemicals.

Installation Requirements

Dimensions and Specifications

Lists key dimensions, net weight, and electrical requirements for installation.

Window Installation

Window Size and Clearance

Specifies acceptable window sizes and necessary clearances for proper installation.

Cabinet Preparation and Seals

Cabinet Installation Steps

Curtain Panel Attachment

Securing Unit to Window Sills

Step-by-step guide for installing the unit and securing it to the window sills.

Completing Window Installation

Panel and Bracket Installation

Finalizing Installation

Attaching Heatproof Foam and Front Grille

How to Use the Air Conditioner

Control Panel and Remote Overview

Explains the functions of the control panel buttons and the remote control.

Operating Modes and Features

Details the different operating modes (Cool, Energy Saver, Fan Only, Dry) and special features.

Care and Cleaning

Air Filter Maintenance

Cleaning the Air Conditioner Unit

Troubleshooting Guide

Troubleshooting: Problem Resolution

Common AC Problems and Solutions

Addresses issues like rapid on/off, noise, remote control failure, and unit not starting.

Troubleshooting: Cooling & Water Issues

Poor Cooling and Freezing

Water Drainage and Collection

Kenmore 580.77247710 Specifications

General IconGeneral
BrandKenmore
Model Number580.77247710
Voltage115V
Number of Cooling Speeds3
Number of Fan Speeds3
Filter TypeWashable
Installation TypeWindow
TypeWindow Air Conditioner

Related product manuals