8
1529
Models At A Glance
Read these instructions carefully before using the Dishwasher. For best results in the
use and operation of your dishwasher fi nd your model below. Detailed instructions for
each Cycle and Option follow later in the Use and Care Guide.
Wash System
Your Kenmore dishwasher fi lters 100% of the water for optimum cleaning. The wash
system uses alternating arms to save water and energy and includes a heavy duty
stainless steel food disposer that grinds up large food particles.
How the wash system works
1. Load the dishwasher ( See preparing and Loading Dishes).
2. Hot water enters the dishwasher, covers the fi lter, and rises to the bottom of the
heater clips.
3. Detergent is dispensed at the appropriate time and mixed with the hot water. This
mixture is pumped through the lower spray arm and sprays against the soiled
surfaces of the dishes to remove food particles.
4. Water passes through the fi ne mesh primary fi lter where food soil is removed and
the clean water is then recirculated.
5. Ports under the lower wash arm direct the food soil through a secondary fi lter into
a collection chamber.
6. Food soil is held in the collection chamber until it is fl ushed away during the drain
cycle.
7. Clean, hot water enters the dishwasher and the sequence is repeated.
8. Beginning with the third water fi ll, the wash action switches between the lower
spray arm and middle spray arm in 90 second intervals. You may notice a change
in sound as the wash action pauses and switches to the other arm.
9. The diswhasher may pause during the cycle while water is being heated. Wash
action will continue during this time.
10. Rinse aid is automatically dispensed in the fi nal rinse to aid in drying.
NOTE
The dishwasher is programmed to remember your last cycle so you do not have to
reset each time. To start the dishwasher using the same cycle and options selected
on the previous wash, just press the START/CANCEL pad.
To Next Page
Loading...
Need help?
General
