3. Select the desired cycle
70 60
40 min
Wrinkle Guard
Less
4O
3O
20 TouchUp
10
Norm_
More
OFF
10 20 30
Select the desired cycle for your load. See the "Cycle Guide"
for more information about each cycle.
Auto Moisture Senslng TM/AutO Dry cycles
You can select a different dry level, depending on your load,
by turning the knob to More, Normal, or Less.
Selecting More, Normal, or Less automatically adjusts the
dryness level at which the dryer will shut off. Once a dry level
is set, it cannot be changed without stopping the cycle.
Auto Moisture SensingTM/Auto Dry cycles give the best drying in
the shortest time. Drying time varies based on fabric type, load
size, and dryness setting.
NOTE: More Dry removes more load moisture. Normal Dry is
used for a starting point for Auto Moisture SensingTM/Auto Dry
cycles. Choose normal to save energy. Less Dry removes less
moisture and used for loads you may want to put on a hanger
to complete drying.
4. Set cycle options (on some models)
Medium
Off On Casual
Low High
Delicates Cotton
WRINKLE GUARD DRYTEMP
5. Select Signal, if desired (on some models)
SIGNAL
Off On
PUSH to START
Turn the SIGNAL knob to select the desired setting (On or Off).
The Signal produces an audible sound when the drying cycle
is finished. Promptly removing clothes at the end of the cycle
reduces wrinkling.
NOTE: When the Wrinkle Guard TM option is selected and the
Signal is on, the tone will sound every 5 minutes until the clothes
are removed, or the Wrinkle Guard TM option ends.
6. Press and hold PUSH to START/START
to begin cycle
SIGNAL
Off On
PUSH to START
C)
START
Press and hold the PUSH to START/START (on some models)
button to begin the cycle.
Promptly remove garments after cycle has completed to
reduce wrinkling. Use the Wrinkle Guard TM option to avoid
wrinkling when you are unable to remove a load from the
dryer as soon as it stops.
Select the cycle options by turning the knob to the desired
position.
NOTE: Not all options and settings are available with all cycles.
Wrinkle Guard TM option
[] Get up to 40 minutes of heat-free, periodic tumbling at the
end of a cycle. Turn the WRINKLE GUARD TM knob to select
ON or OFF at any time before the cycle has ended.
Dry Ternp
Turn the DRY TEMP knob to change the drying temperature
setting. See "Setting the Drying Temperature."
8
To Next Page
Loading...
