EasyManua.ls Logo

Kenmore 790.7403 - Electrical and Gas Safety

Kenmore 790.7403
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this appliance.
_l__Other surfaces of the appliance
may become hot enough to cause burns
including oven vent openings and surfaces
near these openings, oven doors, and
windows of oven doors.
Grounding Instructions
Avoid fire hazard or electrical
shack. Do not use an adapter plug, and
extension card, or remove grounding prong
from the power card. Failure to follow this
warning may cause serious injury, fire, or
death.
This appliance is equipped with a three-
prong grounding plug. For your protection
against shack hazard, it should be plugged
directly into a properly grounded receptacle.
Do not cut or remove the grounding prong
from this plug.
For personal safety, this appliance must be
properly grounded. For maximum safety, the
power card must be plugged into an elec-
trical outlet that is correctly polarized and
properly grounded.
If a two-prong wall receptacle is the only
available outlet, it is the personal responsi-
bility of the consumer to have it replaced
with a properly grounded three-prong wall
receptacle installed by a qualified electri-
cian.
Conversion to L.P. Gas
Personal injury or death from
electrical shock may occur if the conversion
to L.P. gas is not made by a qualified
installer or electrician.
_Any additions, changes or conver-
sions required in order for this appliance to
satisfactorily meet the application needs
must be made by a qualified technician.
If L.P.conversion is needed, contact your
local L.P.Gas provider for assistance. The L.P.
conversion kit is provided with this appliance
and is located on the lower REAR (back side)
panel of the range. Before installing the kit
be sure to read the L.P. Installation Instruc-
tions and follow them carefully when making
the installation.
Product Record: You may find the model and serial
number printed on an identification label. The label
is located on the lower right of the oven frame.
Open the drawer to see the serial label.
Serial Plate Location
To locate the serial plate open storage drawer (some
models) or warmer drawer (some models). The serial
plate is attached to the lower right oven frame.
Record the date of purchase, model and serial
number of your product in the corresponding space
below.
Model
Number:
Grounding type
wall receptacle
Do not cut, remove, or
bypass the grounding
plug under any
circumstances.
Serial Number:
Date of Purchase:
Save your sales receipt for future reference.
Power supply cord
with 3-prong
grounding plug
See the installation instructions packaged
with this appliance for complete installation
and grounding instructions.
This appliance allows for conversion to
Liquefied Petroleum (L.P.)Gas.
Save these instructions for future reference.
7