EasyManua.ls Logo

Kenmore 796.405190 User Manual

Kenmore 796.405190
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
WASHING MACHINE
SERVICE MANUAL
CAUTION
READ THIS MANUAL CAREFULLY TO DIAGNOSE
PROBLEMS CORRECTLY BEFORE SERVICING THE UNIT.
http://www.managemyhome.com
MODEL : 796.4051#90#

Questions and Answers:

Kenmore 796.405190 Specifications

General IconGeneral
BrandKenmore
Model796.405190
CategoryWasher
LanguageEnglish

Summary

1. SPECIFICATIONS

2. FEATURES & TECHNICAL EXPLANATION

2-1. FEATURES

Describes key features like Ultra Capacity, Direct Drive System, Tilted Drum, RollerJets, Automatic Wash Load Detection, Built-in Heater, and Control Lock.

2-2. NEURO FUZZY WASHING TIME OPTIMIZATION

Explains how washing time is optimized based on water temperature, selected temperature, and load size.

2-3. WATER LEVEL CONTROL

Details the use of a pressure sensor to control water level in the tub.

2-4. DOOR CONTROL

Explains how the door operates, locks, and unlocks during operation and power failures.

2-5. THE DOOR CAN NOT BE OPENED

Lists conditions under which the door cannot be opened, like during operation or if the door lock light is on.

2-6. CONTROL LOCK

Describes how to use the Control Lock feature to prevent unintended operation.

3. PARTS IDENTIFICATION

ACCESSORIES

Lists and illustrates various accessories included with the washing machine.

4. INSTALLATION & TEST

STANDARD INSTALLATION

Provides step-by-step instructions for standard installation, including removing shipping bolts and leveling.

HOW TO CONNECT THE INLET HOSE

Instructions for correctly connecting the inlet hose to prevent leaks.

CONNECT THE DRAIN HOSE

Guidelines for connecting the drain hose, including avoiding twists and submersion.

CONNECT POWER PLUG

Advice on connecting the power plug safely, avoiding multiple devices.

5. OPERATION

5-1. CONTROL PANEL FEATURES

Identifies and describes the functions of the various buttons and displays on the control panel.

5-2. CYCLE GUIDE

Provides a guide to different wash cycles, fabric types, settings, and options.

5-3. CYCLE OPTIONS

Details various cycle options like Delay Start, Stain Treat, 2nd Rinse, and Auto Soak.

5-4. SPECIAL FUNCTION

Explains special functions such as Clean Washer, Control Lock, My Cycle, and Smart Sense.

5-5. EXPLANATION OF EACH PROCESS

Describes the step-by-step process of various washing operations.

6. PROGRAM CHART

7. TEST MODE

7-1. SAFETY CAUTION

Important safety precautions to be observed during troubleshooting and handling electronic components.

7-2. LOAD TEST MODE

Instructions on how to enter and use the load test mode for diagnostics.

7-3. HOW TO CHECK THE WATER LEVEL FREQUENCY

Method to check the water level frequency using specific button combinations.

8. TROUBLESHOOTING

8-1. SAFETY CAUTION

Safety precautions for electrical shock when troubleshooting.

8-2. ERROR MODE SUMMERY

Summary of error codes, their symptoms, and potential causes.

8-3. TROUBLESHOOTING SUMMARY

A summary of troubleshooting steps and a circuit diagram.

8-4. TROUBLESHOOTING WITH ERROR - INLET VALVE ERROR

Detailed troubleshooting steps for Inlet Valve Error.

8-4. TROUBLESHOOTING WITH ERROR - DRAIN ERROR

Troubleshooting steps for DRAIN ERROR and OVER FLOW ERROR.

8-4. TROUBLESHOOTING WITH ERROR - HEATING ERROR

Troubleshooting steps for HEATING ERROR.

8-4. TROUBLESHOOTING WITH ERROR - LOCKED MOTOR ERROR

Troubleshooting steps for LOCKED MOTOR ERROR.

8-4. TROUBLESHOOTING WITH ERROR - DOOR OPEN ERROR

Troubleshooting steps for DOOR OPEN ERROR.

8-4. TROUBLESHOOTING WITH ERROR - UNBALANCE/OVER FLOW ERROR

Troubleshooting steps for UNBALANCE ERROR and OVER FLOW ERROR.

8-4. TROUBLESHOOTING WITH ERROR - PRESSURE SENSOR ERROR

Troubleshooting steps for PRESSURE SENSOR ERROR.

8-5. TROUBLE SHOOTING ELSE - NO POWER

Troubleshooting steps for NO POWER issues.

8-5. TROUBLE SHOOTING ELSE - BUTTON DOESN'T WORK

Troubleshooting steps for BUTTON DOESN'T WORK issues.

8-5. TROUBLE SHOOTING ELSE - VIBRATION & NOISE IN SPIN

Troubleshooting steps for VIBRATION & NOISE IN SPIN issues.

8-5. TROUBLE SHOOTING ELSE - DETERGENT FLOW

Troubleshooting for DETERGENT DOES NOT FLOW IN and ABNORMAL SOUND.

8-5. TROUBLE SHOOTING ELSE - LIQUID DETERGENT FLOW

Troubleshooting for LIQUID DETERGENT/SOFTENER/BLEACH DOES NOT FLOW IN and ABNORMAL SOUND.

9. COMPONENT TESTING INFORMATION

9-1. FILTER ASSEMBLY (LINE FILTER)

Information on testing the filter assembly, including circuit diagram and test points.

9-2. DOOR LOCK SWITCH ASSEMBLY

Details on the door lock switch assembly, its function, and testing.

9-3. STATOR ASSEMBLY

Information on the stator assembly, its function, and testing of windings.

9-3. STATOR ASSEMBLY (HALL SENSOR VOLTAGE TEST)

Voltage testing of the Hall Sensor at the stator.

9-3. STATOR ASSEMBLY (HALL SENSOR PCB TEST)

Voltage testing of the Hall Sensor from the Main PCB Assembly.

9-4. PUMP MOTOR ASSEMBLY

Information on the pump motor assembly, its function, and testing.

9-5. INLET VALVE ASSEMBLY

Details on the inlet valve assembly, its function, and resistance testing.

9-6. HEATER ASSEMBLY

Information on the heater assembly, its function, and resistance testing.

9-7. THERMISTOR ASSEMBLY

Information on the thermistor assembly, its function, and resistance testing.

10. DISASSEMBLY INSTRUCTIONS

CONTROL PANEL ASSEMBLY

Step-by-step instructions for disassembling the control panel assembly.

MAIN PWB ASSEMBLY

Step-by-step instructions for disassembling the main PCB assembly.

DISPENSER ASSEMBLY

Step-by-step instructions for disassembling the dispenser assembly.

CABINET COVER

Instructions for disassembling the cabinet cover.

CABINET COVER (CONTINUED)

Further steps for disassembling the cabinet cover.

DOOR

Instructions for disassembling the door.

DOOR LOCK SWITCH ASSEMBLY

Instructions for disassembling the door lock switch assembly.

HEATER

Instructions for disassembling the heater.

THERMISTOR

Instructions for disassembling the thermistor.

WHEN FOREIGN OBJECT IS STUCK BETWEEN DRUM AND TUB

Procedure for removing foreign objects stuck between the drum and tub.

MOTOR/DAMPER

Instructions for disassembling the motor and damper.

11. EXPLODED VIEW

11-1. CABINET & CONTROL PANEL ASSEMBLY

Exploded view showing parts of the cabinet and control panel assembly.

11-2. DRUM & TUB ASSEMBLY

Exploded view of the drum and tub assembly, listing parts.

11-3. DISPENSER ASSEMBLY

Exploded view of the dispenser assembly, listing parts.

Related product manuals