EasyManua.ls Logo

Kenmore 859841 - CARE AND CLEANING; REMOVABLE PARTS

Kenmore 859841
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CARE AND CLEANING
Wipe the microwave inside and out, and the hood bottom cover outside with a soft cloth and a mild
detergent solution. Then rinse and wipe dry. Use a chrome cleaner and polish on chrome, metal and
aluminum surface. This should be done on a weekly basis-more often if needed. Never use rough cleaning
powders or pads.
I[
REMOVABLE PARTS
Temperature probe
After each use of the Temperature Probe, it must be removed from the socket.
Use pot holder, as the wire, plug and sensor sections may be hot. Wipe food or
liquid from sensor with damp cloth.
Glass tray and Metal rack
The glass tray and metal rack can be removed for cleaning at the sink. Wipe up
spillovers with paper towel or cloth before removal of tray.
Be careful not to chip or scratch the edges of the tray as this may cause the tray
to break during use.
33

Table of Contents

Related product manuals