1. Turn off and unplug vacuum cleaner. DO
NOT drip water on vacuum cleaner.
2. To clean exterior, or to reduce static
electricity and dust build-up, wipe outer
surface with a clean, soft cloth that has
been dipped in a solution of mild liquid
detergent and water, then wrung dry.
Wipe dry after cleaning.
For best cleaning results, the dust bag
should be changed often. The CHECK BAG
indicator will come on when the bag needs
to be changed or the airflow is blocked.
NOTE
: See REPLACEMENT PARTS for
part number and purchase details (page 6).
1. Turn off and unplug vacuum cleaner.
2. Remove hose from canister.
3. Squeeze the hood release button, then
lift canister hood.
4. Pull bag out of the bag mount.
NOTE
: The bag mount will flip forward
after removing bag. This will prevent
the hood from closing until a new bag is
installed.
5. Check the motor safety filter and clean
or, if necessary replace. See MOTOR
SAFETY FILTER CLEANING (page 19-20).
- 18 -
CLEANING EXTERIOR AND ATTACHMENTS
DUST BAG CHANGING
CAUTION
Do not use attachments if they are wet.
Attachments used in dirty areas, such as
under a refrigerator, should not be used
on other surfaces until they are washed.
They could leave marks.
To Next Page
Loading...
Need help?
General
