Kenmore CROSSOVER MAX - Page 19

- 1 -
HEPA MEDIA EXHAUST FILTER
EXHAUST FILTER
The ereplaced when
it becomes dirty. The timing between
replacement intervals will depend on the
use conditions the vacuum cleaner is
exposed toecked
when emptying the dust cup. 
CANNOT be washed as it will lose its
dust trapping ability.
1. Remove eover by pulling
the release tab on the cover and rotating
out from vacuum cleaner.
2. Remove the
HEPA Media
e
from vacuum
cleaner.
3. Place new
rtridge
into vacuum
cleaner as
shown.
4. Replace the eover by
placing bottom tab into the slot.
5. Rover onto vacuum
cleaner, and press down as shown, until
cover snaps into place.