To Next PageTo Next PageWhy is my Kenmore Washer producing excessive suds?
If your Kenmore Washer is experiencing excessive suds, it's likely due to using too much detergent or the wrong type. Ensure you're only using detergent with the High-Efficiency (HE) logo.
How to fix a Kenmore Elite 796.4147 Washer that will not turn on?
If your Kenmore Washer won't turn on, first ensure the power cord is securely plugged into a grounded, 3-prong outlet. Check your house fuse or circuit breaker and reset or replace if necessary, without increasing the fuse capacity. If a circuit overload is the issue, consult a qualified electrician. Also, avoid connecting multiple appliances to the same outlet; consider having an additional circuit installed by an electrician.
What to do if the Kenmore Washer door will not unlock?
If your Kenmore Washer door won't unlock after stopping or pausing a cycle, it's likely a safety feature is engaged due to high interior temperature or water level. Allow the washer to cool down until the DOOR LOCK indicator turns OFF. To drain the water, press POWER, then press the SPIN SPEED button without selecting a cycle.
Why is my Kenmore Washer not draining water properly?
If your Kenmore Washer is not draining properly or the display indicates an error, check if the drain hose is kinked, pinched, or clogged. Also, inspect the drain pump filter for clogs. Ensure the drain discharge isn't more than 96 inches above the bottom of the washer. Clean the drain pump filter and adjust or repair the drain as needed, keeping in mind the maximum drain height is 96 inches.
Why is my Kenmore Elite 796.4147 filling with water slowly?
If your Kenmore Washer is filling with water slowly or not at all, or the display shows an error, ensure the water supply faucets are fully open and the water line hoses aren't kinked, pinched, or crushed. Clean the water inlet filters. Check another faucet in the house to ensure adequate water pressure. Note that leak-limiting hoses can sometimes cause issues and are not recommended.
What to do if Kenmore Elite 796.4147 cycle won’t start?
If your Kenmore Washer cycle won’t start or the display shows an error, make sure the door is closed properly and press the START/PAUSE button. It may take a few moments for the drum to turn or spin after starting. The washer won't operate unless the door is locked. If the door is closed and locked but the error message persists, call for service.
What does it mean if my Kenmore Elite 796.4147 Washer displays a motor error?
If your Kenmore Washer display shows a motor error, allow the washer to stand for 30 minutes and then restart the cycle. If the error code persists, call for service.
What causes rattling noise in Kenmore Elite 796.4147?
If you hear a rattling and clanking noise in your Kenmore Washer, there might be foreign objects like keys, coins, or safety pins in the drum or pump. Stop the washer, check the drum and drain filter for these objects. If the noise continues after restarting, call for service.
Why is my Kenmore Washer making a vibrating noise?
A vibrating Kenmore Washer could be due to several reasons. First, ensure all shipping bolts and packaging materials have been removed. An unevenly distributed wash load can also cause vibration; pause the cycle and redistribute the load after the door unlocks. Check that all leveling feet are firmly and evenly on the floor. Finally, make sure the floor is solid and doesn't flex.
How to fix control error on Kenmore Elite 796.4147 Washer?
If your Kenmore Washer display shows a control error, unplug the washer and wait 60 seconds. Reconnect the power and try again. If the error reappears, call for service.
Essential warnings for safe operation, installation, and usage of the washing machine.
Focuses on safe electrical connections, grounding procedures, and power supply.
Specific warnings for children and detailed grounding instructions for the appliance.
Describes the function of each button, display, and indicator on the control panel.
Guides on using the load-sensing feature to determine detergent dosage.
Guides on slow draining, filling issues, and error code diagnosis for the washer.
Essential warnings for safe operation, installation, and usage of the washing machine.
Focuses on safe electrical connections, grounding procedures, and power supply.
Specific warnings for children and detailed grounding instructions for the appliance.
Describes the function of each button, display, and indicator on the control panel.
Guides on using the load-sensing feature to determine detergent dosage.
Guides on slow draining, filling issues, and error code diagnosis for the washer.
General| Brand | Kenmore |
|---|---|
| Model Number | 796.4147 |
| Type | Front Load Washer |
| Capacity | 4.5 cu. ft. |
| Color | White |
| Energy Star Certified | Yes |
| Number of Wash Cycles | 14 |
| Maximum Spin Speed | 1300 RPM |
| Steam Washer | Yes |
| Sanitize Cycle | Yes |
| Allergiene Cycle | Yes |
| Width | 27 inches |
