KENMORE INDUCTION COOKTOP INSTALLATION INSTRUCTIONS
Cooktop Installation
sure all cooktop screws are tight (see Figure 5).
NOTE: Do not use caulking compound; cooktop should
Figure 5
The retainer brackets MUST be installed, to meet local
codes or, in their absence, with the National Electrical
Code ANSI/NFPA No. 70—latest edition (see Figure
6).
Figure 6
Granite countertop Installation
1-800-4-MY-HOME
®
or through our web site
at www.partsdirect.com.
Checking Operation
Use and Care Guide for operation.
Do not touch cooktop glass or
Before You Call for Service
Use and Care Guide.
workmanship or materials in this appliance.
Use and Care Guide
1-800-4-MY-HOME
®
.
Figure 7
Position brackets
on unit cutout
center line as
shown.
under the
burner box
retainer
bracket.
To Next Page
Loading...
Need help?
General