Kenmore KLBH031A E Series User Manual

12
NOTE:
Removing the doors is always recommended
when it is necessary to move the refrigerator through
a narrow opening. If it is necessary to remove the
handles, follow the directions below.
HOW TO REMOVE REFRIGERATOR
DOOR HANDLE
NOTE:
Handle appearance may vary from the
illustrations on this page.
Removing Refrigerator Handle
Use the provided 2.5 mm hex key to loosen the
2 set screws located on the inside top ends of the
handle. Remove the handle from the underlying
handle mounting bolts on the door.
HOW TO REPLACE REFRIGERATOR
DOOR HANDLE
NOTE:
Handle appearance may vary from the
illustrations on this page.
Replacing Refrigerator Handle
Place the handle ends onto the handle mounting
bolts on the door. Use the 2.5 mm hex key to
tighten the 2 set screws to secure the handle in
place.
REFRIGERATOR INSTALLATION
Mounting
Bolts
Set Screw
Hex Key
Refrigerator door handles are located
in top packing cushion
Refrigerator door
handles
Kenmore향 31 큐빅(영+스)_F840-2(KLBH031A@E).indd 12 2021-03-23 오후 3:22:29

Kenmore KLBH031A E Series Specifications

General

Brand	Kenmore
Model	KLBH031A E Series
Category	Refrigerator
Language	English