To Next PageTo Next PageHow to prevent spots and streaks on glassware in Kenmore Lavadora de Platos Dishwasher?
If you see spots and streaks on glassware or residue on the dishes in your Kenmore dishwasher, the rinse agent setting may be incorrect. Depending on the hardness of your water, adjust the rinse agent dispenser.
Why won't the detergent dispenser cover shut on my Kenmore Dishwasher?
If the detergent dispenser cover of your Kenmore dishwasher will not shut, it could be due to improper operation of the detergent cover. Also, a previous cycle may not have been finished, reset, or was interrupted.
Why is the fascia panel discolored on my Kenmore Lavadora de Platos Dishwasher?
If the fascia panel of your Kenmore dishwasher is discolored or marked, it may be due to the use of an abrasive cleaner. Use mild detergents with a soft damp cloth instead.
Why is my Kenmore Dishwasher making noise during the wash cycle?
Water circulation sound is normal in Kenmore dishwashers, but if you suspect items are banging into each other or into the spray arms because the dishes may not be arranged properly.
General| Type | Built-In |
|---|---|
| Number of Wash Cycles | 6 |
| Energy Star Certified | Yes |
| Color | Stainless Steel |
| Soil Sensor | Yes |
| Third Rack | No |
| Heated Dry | Yes |
| Wash Cycles | Heavy, Normal, Rinse Only |
Provides critical safety warnings regarding misuse, unqualified service, electrical hazards, and chemical use.
Details essential safety measures for installation, operation, loading, and child safety.
Provides tips on removing food particles, loading dishwasher-safe items, and avoiding nesting.
Details how to load silverware, including placement of knives and utensils for safety and optimal cleaning.
Advises using only dishwasher-specific detergents and avoiding hand dishwashing products.
Instructions on how to open, close, and fill the detergent dispenser cup with the correct amount.
Explains the importance of rinse agent for proper drying and how the indicator light works.
Instructions on how to cancel an ongoing cycle or change to a new one.
Instructions for canceling, changing cycles, and using the delay start feature.
Step-by-step guide to remove, clean, and reinstall the Large Object Trap, Cylinder Filter, and Fine Filter.
Diagnoses causes for the dishwasher not starting and provides corrective actions.
Troubleshooting steps for a blank display or non-illuminating console lights.
Addresses issues with cleaning performance, including spray arm obstruction and filter clogs.
Solutions for poor drying results, including checking rinse agent and using Dry Assist.
Steps to eliminate odors, including cleaning filters, door seals, and drain hoses.
Diagnoses causes for lack of water fill, such as supply issues or delay start activation.
Identifies common causes of water leaks, including suds, door seal issues, and installation problems.
Ensures the correct sanitizing cycle was run and the door was not opened mid-cycle.
Diagnoses drain issues, including kinked hoses, air gaps, and plumbing problems.
