KNOW ABOUT YOUR WATER SOFTENER
SECTION 4
3UREOHPV 4XHVWLRQV" &DOO .HQPRUH :DWHU /LQH
A. DIMENSIONS / SPECIFICATIONS
OTHER SPECIFICATIONS UltraSoft 100 UltraSoft 150
Type of ion exchange material (resin) high capacity high capacity
Amount of resin (cu ft) .72 .80
Regeneration (recharge) cycle times (minutes)
Fill 2-9 2-10
Brining / brine rinse 102 - 104 106 - 110
Backwash 77
Fast rinse 33
Total regeneration time 114 - 123 119 - 129
Efficiency Rating 5060 @ 2.2 lb salt 5060 @ 2.4 lb salt
Max. Drain Flow Rate (gpm) 1.8 1.8
gpm = gallons per minute gpg = grains per gallon
psi = pounds per square inch ppm = parts per million
This system conforms to ANSI/NSF 44 for the specific performance claims as verified and substantiated by test data.
The efficiency rating is onlyvalid at the stated salt dosage. These softeners were efficiency ratedaccording to ANSI/NSF
Standard 44.
To Next Page
Loading...
Need help?
General
