THERE SHOULD BE A CLEARANCE OF NO LESS THAN 1-2 INCHES BETWEEN THE
GROIN AREA OF THE INTENDED RIDER AND THE TOP TUBE OF THE BICYCLE, WHILE
THE RIDER STRADDLES THE BICYCLE WITH BOTH FEET FLAT ON THE GROUND.
THE SEATPOST “MINIMUM INSERTION” / “MAXIMUM
HEIGHT” MARK SHOULD NOT BE VISIBLE WHEN THE
SEAT POST IS INSERTED INTO THE SEAT MAST OF THE
BIKE. DO NOT RAISE THE SEAT POST BEYOND THIS
MARK. THE SEAT POST MAY BREAK CAUSING YOU TO
LOSE CONTROL AND FALL. ALWAYS CHECK TO MAKE
SURE SEAT POST ADJUSTING MECHANISM IS TIGHTENED
SECURELY BEFORE RIDING.
Arms not
overextended
Handlebar stem
height about the
same as
seat height
Pedal
bottom position
RIDING POSITION
To Next Page
Loading...
