EasyManua.ls Logo

Kentix MultiSensor-LAN - Introduction and Summary; Product Features Overview; Safety Precautions; Installation Guidelines

Kentix MultiSensor-LAN
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction and summary
Thank you for your decision to buy a KENTIX monitoring solution based on the KENTIX MultiSensor
technology.
Features
The Kentix MultiSensor-LAN is an All-in-One system unit with many integrated sensors.
The MultiSensor-LAN can be a stand-alone device or operated in conjunction with a Kentix AlarmManager.
By the use with an AlarmManager provides you a more extensive functionality.
The MultiSensor-LAN is installed in server room or rack. It controls and forwards all alarm and fault
messages to the responsible persons.
The configuration is done with the integrated web server, comfortable with a web browser.
For the connection and installation of the devices you can choose from two options:
Plug and Play installation with plug technology - without wiring and jamming. Voltage supply by
„Power over Ethernet“ (PoE).
Fixed installation with conventional installation cables.
Applications
Industry and Trade
Banks
Authorities and hospitals
Telecommunications
Law firms and medical practices
Energy and water utility
Safety note
The installation of the MultiSensors must be run by an competent person.
In a power failure, the settings are not lost. Energized relays drop out and go back when the power returns in
the unswitched output state.
To bridge longer downtime, use a suitable UPS system.
Installation
To ensure the security and integrity of the operator, and the correct operation of the KENTIX MultiSensor-
LAN, the execution of the installation only has to be done by an expert. There must also the relevant
requirements are met.
Environment
The installation must be such that the KENTIX MultiSensor-LAN and all associated cables are not affected
by, environmental conditions: dust, humidity, excessive heat, direct sunlight, heat sources, devices
that build strong electromagnetic fields, liquids or corrosive chemicals.
See the technical data sheet for more technical data and environment conditions.
Protection
During the installation of the alarm manager, certain degrees of protection must be guaranteed. Observe the
relevant regulations for installation in certain environments such as industrial or residential and commercial
buildings.
Page 3 ! (09-2012, subject to change)! www.kentix.de