9. Safety Precautions
Ŷ
The manual said that the purpose of warning sign and legend is safe and
proper using the product by yours, and prevents the harm to you and others.
ŶThe warning sign and legend as well as their meaning is as follows:
It shows that it will appear the possibility of
casualties or serious injury in the error use.
It shows that it will appear the possibility of
personal injury or damaged goods in the error use.
-- The therapeutic apparatus cannot be used with the HF
apparatus to avoid burns or damaged apparatus
-- If the patient himself uses the therapeutic apparatus and HF
apparatus at the same time, the part of massage plate may be
cause burns on apparatus, it may also damage the apparatus;
If use the apparatus near (1 meter) the short wave or microwave
therapeutic apparatus, the output of apparatus may be instability.
-- It will increase a danger of heart fibrillation by using electrode
pads close to the chest.
-- Do not modify this equipment without authorization of the
manufacturer
--When need replacing the lithium batteries, please contact
aftersales staff designated and authorized by the manufacturer
directly, its accessories shall not be replaceable.
-- Product battery replacement should be replaced by
professional maintenance staff, otherwise it will produce risk.
--Shall not make personnel can no longer take care of
themselves,nfant, or not sensitive person use.
Warning
attention
attention
Warning
Sigh
Meaning
It shows that it will appear the dangerous of
casualties or serious injury in the error use.
using
contraindication
or lower level, at the same time will send out a “drop”, the user can choose
WKHLURZQVWUHQJWKLQRUGHUWRWKHPRVWFRPIRUWDEOHDWRWDORIOHYHOV
of strength adjustment)
The host computer has the intelligent detection function, when the electrode
piece and the skin contact is good, the main opportunity moderates the
force, reaches the set strength directly;
(5)Mode selection
There are 6 modes for auto, and 9 modes for manual. Long press “-” key to
choose the auto functions or manual functions. Long press “+” key to choose
the Modes. When the mode is switched, the strength automatically recovers
to the "1" file to prevent the intensity from being very high at the beginning
of the mode switching, which makes the user feel uncomfortable. According
to their own preferences, the user can choose different working modes.
(6)Automatic / manual mode selection(Remote control)
There are 6 modes for auto, and 9 modes for manual. Long press “F” key to
choose the auto functions or manual functions. Short press “F” key to
choose the Modes.
(7)shut down
Work from start to end about 15 minutes, 15 minutes after automatic
shutdown;
If the host is not used in the boot state, if the host is not used within 30
seconds, the host will automatically shut down the computer.
Press the key, you can manually shut down the machine halfway;
8.1 The use of battery
1)The device powered by the lithium battery, which can rechargeable
through the adapter.
2)If the indicator is flashing, showing the electric quantity of battery is not
enough and please charging in time.
3)If it is not used for one month or long term, please fully charge it first.
4)Do not use the device under the environment which more than 45℃,
otherwise it will affect the performance and life of the battery.
5)The discarding method of the post-batteries should be deal with according
to the urban environmental protection.
ⒺⓀ
ⒺⓁ
To Next Page