Kentro KTR-2492 - 10 Product Maintenance; 11 Product Scrap Processing; 12 Accessories and Parts

1)Before turn on the main unit, please check whether the battery is installed
correctly, each connecting parts whether is connected in good;
2)If the apparatus runs normally, show key invalidly after press. To turn it off
after a few seconds and then opening, if still not normal, check whether it is
broken for the apparatus;
3)If all operation of the apparatus are normal but without output (the user
without feelings) after turn it on. Please check whether the electrode pads is
directly contacted with skin, the contacting parts whether has hair, clothes
and so on;
4)While cleaning, shutdown first, let the electrode wires stay away from the
electric supply socket. You can wipe by using soft cloth or towel with a little
water and after dry.
5)After each use, please clean electrode pads, you can wipe by using soft
cloth or towel with a little water and after dry, when conducting electrode
pads are particularly dirt, you can wipe by using soft cloth with a little
medicinal alcohol (alcohol concentration as 75%).
6)The apparatus should be placed in the place which is dry, ventilated and
good insulation use.
7)When the apparatus is moved, must be handled with care, avoiding the
shake.
7KHDSSDUDWXVVKRXOGEHFKHFNHGWKHEDWWHULHVFRQGLWLRQWRFKHFN
whether the output is good, if has abnormal conditions, you should pay
attention to it and service it in time.
9)The apparatus’ shell board should be pay attention to protection, avoiding
the abrasion.
10)The non-professional cannot disassemble the host to avoid getting an
electric shock or damaging the apparatus, an accident can happen because
of it, all at your peril.
10. Product maintenance
12.1 Electrode pads
Electrode Pads of Transcutaneous Electrical Nerve Stimulators
Please see all the electrode pads in the table below. The electrode pads
here are for customers to choose
12. Accessories and Parts
The therapeutic equipment belongs to medical device, if the complete
machine is already aging and is not able to use, the process mode
according to the local legislation carry through scrap processing.
11. Product Scrap Processing
ⒻⒺ
ⒻⒻ
NO.
1
2
3
4
5
6
7

Model
EPAD
-H01
EPAD
-H02
EPAD
-F01
EPAD
-F02
EPAD
-F03
EPAD
-B01
EPAD
-T01
EPAD
-Z01
Picture
Size
Effective
Area
(cm2)
Material
125×55mm
130×60mm
176×105mm
166×166mm
192×160mm
240×65mm
393×110mm
îPP
26
22
73


50
92
140
Hydrogels
Hydrogels
Hydrogels
Hydrogels
Hydrogels
Hydrogels
Hydrogels
Silver
paste