Kenwood CD Series User Manual

INSTRUCTION MANUAL
KENWOOD CORPORATION
B60-3684-00 CH ( K,P,Y, M ,X ,T )
I D
99/12 11 10 9 8 7 6 5 4 3 2 1 98/12 11 10 9 8 7 6 5 4 3 2 1
This instruction manual is used for six models. Model availability and features
(functions) may differ depending on the country and sales area.
CD PLAYER
CD/DPF-R SERIES
CD-206
CD-204
CD-203
DPF-R6010
DPF-R4010
DPF-R3010
DTS disclaimer clause
When Playing DTS-encoded CDs, excessive noise will be exhibited from the analog
stereo outputs. The consumer should take proper precautions when the analog stereo
outputs of the CD player is connected to an amplification system. To enjoy DTS
Digital Surround playback, an external 5.1 channel DTS Digital Surround decoder
system must be connected to the digital output (S/PDIF, ASE/ EBU, or TosLink) of the
CD player.
Downloaded from: http://www.usersmanualguide.com/

Kenwood CD Series Specifications

General

Type	CD Player
Output Voltage	2.0V
Digital Output	Coaxial
Channels	2
Frequency Response	20Hz - 20kHz
Dynamic Range	95dB

Summary

Before Applying Power and Safety Precautions

General Safety Warnings

Important warnings to prevent fire, electric shock, and exposure to moisture.

Unpacking, Features, and Accessories

Key Special Features

Highlights advanced technologies and playback features like CD-TEXT.

System Connections and Troubleshooting

Connecting System Components

Diagrams showing how to connect the CD player to other audio equipment.

Controls and Indicators Overview

Front Panel Controls and Displays

Identifies buttons, indicators, and displays on the CD player's front panel.

Remote Control Operation Guide

Remote Control Unit Layout

Illustration and identification of remote control buttons.

Normal Playback (Track Mode)

Starting and Controlling Track Playback

How to start, pause, and stop playback of tracks in order.

Advanced Track Selection and Modes

Selecting Specific Tracks and Skipping

Procedures for playing specific tracks and skipping through them.

Searching Tracks by Title

Programmed Playback (PGM Mode)

Setting Up a Play Program

Step-by-step guide to programming desired tracks in order.

Starting Programmed Playback

How to initiate playback of a programmed sequence.

Managing Programmed Tracks

Random Playback Operation

Initiating Random Track Selection

How to set the player to play tracks in a random sequence.

Repeat Playback Modes

Disc and Entire Disc Repeat

CD Editing Functions

Normal EDIT: Single Disc Editing

Procedure for editing tracks from a single CD onto tape.

MULTI EDIT: Multi-Disc Editing Setup

How to prepare for editing tracks from multiple CDs.

Performing Multi-Disc Editing

MULTI EDIT Operation Steps

Detailed steps for selecting tracks and starting multi-disc editing.

Recording Edited Content

Guidance on recording edited tracks to a cassette deck.

Checking and Clearing Edited Content

Timer Operations for CD Playback

Setting Up Timer Playback

Instructions for connecting components and preparing for timer playback.

Maintenance and Disc Handling

Troubleshooting and Safety Information

CD Player Unit Troubleshooting

Common symptoms, causes, and remedies for player issues.

Remote Control Unit Troubleshooting

Common symptoms, causes, and remedies for remote control issues.

Specifications and FCC Compliance