Kenwood CD Series User Manual

CD-206/ 204 / 2 03/ DPF-R6010/ R4010/ R301 0 (En)
8
Operation of remote control unit
(Except for CD-203/DPF-R3010)
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor. In
such a case, change the system installation position to prevent the malfunction.
Loading batteries
* 3 OUTPUT (DOWN, UP) key 5
4 DISC SELECTOR keys 0
5 DISC SKIP key
90
* 6 Numeric keys (
11
11
1 ~
))
))
),
00
00
0)
!
7 Basic function keys
Stop key (7) 0
Play/Pause key (6) 0
Skip (4,¢) keys !
Search keys (1,¡) !
1 Program-related and other keys
RANDOM key &
REPEAT key *
P.MODE key $
TIME DISPLAY key ^
EDIT key )
* CHECK key (CD-206/DPF-R6010
only) %™
* CLEAR key (CD-206/DPF-R6010
only) ^™
2 Selector keys relating to text infor-
mation
( CD-206/DPF-R6010 only)
* ALL TEXT SEARCH key 9
TEXT DISPLAY key #
ALL INFO. key #
* TITLE SEARCH key @
CD-206/DPF-R6010 :
Model:RC-P0601
Infrared ray system
÷ When pressing more than one remote control key successively, press
the keys securely by leaving an interval of 1 second or more between
keys.
After plugging in the power cord, press the ON/STANDBY (POWER/
) switch of the main unit to turn the unit ON. When the unit is
turned ON, press the key of the function to be operated.
1 Remove the cover. 2 Insert batteries. 3 Close the cover.
÷ Insert two AA-size (R6) batteries as
indicated by the polarity marking.
Operation
Operating range
(Approx.)
Remote control
light sensor
RANDOM
DISC SELECTOR
OUTPUT
12
3
4 5
REPEAT
DOWN UP
DISC SKIP
12
P.MODE
3
45
TIME
DISPLAY
6
EDIT 7 8
9
CHECK
TEXT
DISPLAY
0 +10
CLEAR ALL INFO.
6
ALL TEXT
SEARCH
TITLE
SEARCH
4
7
¡
¢
REMOTE CONTROL UNIT
RC-P060 1
1
1
7
6
5
4
3
2
The keys with the same name as those on the main unit operate the same way as on the main unit.
The keys marked * are provided only on the remote control unit.
CD-204/DPF-R4010 :
Model:RC-P0504
Infrared ray system
1
2
1
2
Notes
Notes
The illustration shows the RC-P0601.
30°
6m
30°
REMOTE CONTROL UNIT
RC-P06 01
Downloaded from: http://www.usersmanualguide.com/

Kenwood CD Series Specifications

General

Type	CD Player
Output Voltage	2.0V
Digital Output	Coaxial
Channels	2
Frequency Response	20Hz - 20kHz
Dynamic Range	95dB