To Next PageTo Next PageWhy are tracks not played back as intended on my Kenwood Car Video System?
If tracks are not played back as you intended on your Kenwood Car Video System, the playback order may differ from the one played back using other players.
What to do if my Kenwood Car Video System displays 'No Signal'?
If your Kenwood Car Video System shows a “No Signal” message: * Start playback on the external component connected to the AV-IN input terminal. * Check the cords and connections. * The signal input may be too weak.
Why is there static noise while listening to the radio on my Kenwood Car Video System?
If you are experiencing static noise while listening to the radio on your Kenwood Car Video System, make sure the antenna is firmly connected.
What to do if my Kenwood Car Video System doesn't work at all?
If your Kenwood Car Video System is completely unresponsive, try resetting the unit.
Why is there no picture on the screen of my Kenwood Car Video System?
If no picture appears on the screen of your Kenwood Car Video System: * Turn on the video component if it is not on. * Connect the video component correctly.
Why won't my iPod/iPhone turn on or work with my Kenwood Car Video System?
If your iPod/iPhone does not turn on or work with your Kenwood Car Video System: * Check the connecting cable and its connection. * Update the firmware version. * Charge the battery. * Check whether the iPod control mode is correctly selected. * Reset the iPod/iPhone.
Why does my Kenwood Car Video System display 'Hung Up Error'?
If your Kenwood Car Video System displays “Hung Up Error”, the call has not ended yet. Park your car and use the connected mobile phone to end the call.
Why does my Kenwood Car Video System display 'Pick Up Error'?
If your Kenwood Car Video System displays “Pick Up Error”, the unit has failed to receive a call.
Why is the sound distorted on my Kenwood Car Video System when using an iPod/iPhone?
If the sound is distorted when using an iPod/iPhone with your Kenwood Car Video System, deactivate the equalizer either on the unit or the iPod/iPhone.
How do I resolve a 'Connection Error' on my Kenwood Car Video System?
If your Kenwood Car Video System displays a “Connection Error”, connect the registered device.
General| Display Size | 6.2 inches |
|---|---|
| Resolution | 800 x 480 pixels |
| Touchscreen | Yes |
| DVD Player | Yes |
| USB Port/Input | Yes |
| Bluetooth | Yes |
| iPod/iPhone Compatibility | Yes |
| Rear View Camera Input | Yes |
| Audio Formats Supported | MP3, WMA, AAC |
| AM/FM Tuner | Yes |
| Steering Wheel Control Compatible | Yes |
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
| Power Output | 50 Watts x 4 |
| RMS Power Output | 22W x 4 |
| Peak Output | 50W x 4 |
| Video Formats Supported | MPEG-1, MPEG-2, DivX |
