A
Andrea RobinsonAug 25, 2025
What to do if Kenwood Receiver does not work at all?
- CChristopher WardAug 25, 2025
If your Kenwood Receiver is completely unresponsive, try resetting the unit.
To Next PageTo Next PageWhat to do if Kenwood Receiver does not work at all?
If your Kenwood Receiver is completely unresponsive, try resetting the unit.
What to do if iPod/iPhone does not work with Kenwood DDX4031M?
If your iPod/iPhone is not turning on or working when connected to your Kenwood Receiver: - Check the connecting cable and its connection. - Update the firmware version. - Charge the battery. - Check whether the iPod control mode is correctly selected. - Reset the iPod/iPhone.
What does “USB Device Error” mean on my Kenwood DDX4031M?
If your Kenwood Receiver displays a “USB Device Error”, it could be due to an abnormal USB power voltage. Try turning the unit off and then on again. If that doesn't work, try connecting a different USB device to see if the issue persists.
Why is there no sound from iPod/iPhone on my Kenwood DDX4031M?
If you're not getting any sound from the speakers when using an iPod/iPhone with your Kenwood Receiver, try disconnecting the iPod/iPhone and then reconnecting it. If that doesn't work, select another source on the receiver and then reselect “iPod”.
What does “NO Data” mean on Kenwood DDX4031M Receiver?
The “NO Data” message on your Kenwood Receiver indicates that no phonebook data is contained in the connected Bluetooth phone.
What does “Connection Error” mean on Kenwood DDX4031M?
The “Connection Error” message on your Kenwood Receiver means that the device is registered but the connection has failed. Connect the registered device.
What does “NO Voice Device” mean on Kenwood Receiver?
The “NO Voice Device” message on your Kenwood Receiver indicates that the connected mobile phone does not have a voice recognition system.
How to improve phone sound quality on Kenwood DDX4031M?
If the phone sound quality is poor on your Kenwood Receiver, try reducing the distance between the unit and the Bluetooth mobile phone. You might also try moving the car to a location with better signal reception.
What does “Miswiring DC Offset Error” mean on Kenwood DDX4031M Receiver?
If your Kenwood Receiver shows a “Miswiring DC Offset Error,” a speaker cord has likely shorted or come into contact with the car chassis. Wire or insulate the speaker cord as appropriate, then reset the unit.
Why can't my Kenwood DDX4031M Receiver play a disc?
If your Kenwood Receiver can't play a disc, record the tracks using a compliant application on the appropriate discs. Also, add appropriate extension codes to the file names.
General
