To Next PageTo Next PageHow to fix a “No Signal” error on Kenwood Monitors?
To resolve the “No Signal” issue on your Kenwood Monitor, try the following: * Start playback on the external component connected to the AV-IN input terminal. * Check the cords and connections to ensure they are secure. * Be aware that a very weak signal input can also cause this message.
Why is the sound distorted on my Kenwood DDX4038 Monitor?
If you are experiencing distorted sound on your Kenwood Monitor, try deactivating the equalizer either on the unit itself or on the connected iPod/iPhone.
What to do if Kenwood Monitors show a “USB Device Error”?
If your Kenwood Monitor displays a “USB Device Error”, the USB power voltage may be abnormal. Try these steps: * Turn the unit off and then back on. * Connect a different USB device to see if the issue persists.
Why is there static noise on my Kenwood DDX4038 when listening to the radio?
If you are getting static noise while listening to the radio on your Kenwood Monitor, make sure the antenna is firmly connected.
Why does my Kenwood DDX4038 have no sound coming out of the speakers?
If no sound comes out of the speakers on your Kenwood Monitor, here are a couple of things you can try: * Adjust the volume to an appropriate level. * Check all cords and connections to ensure they are properly connected.
What to do if my iPod/iPhone doesn't work with my Kenwood Monitor?
If your iPod/iPhone does not turn on or is not working with your Kenwood Monitor, consider the following: * Check the connecting cable and its connection. * Update the firmware version of your device. * Ensure the battery is adequately charged. * Reset the iPod/iPhone.
What does “Miswiring DC Offset Error” mean on Kenwood Monitors?
If your Kenwood Monitor displays “Miswiring DC Offset Error” or “Warning DC Offset Error”, it means a speaker cord has shorted or is in contact with the car chassis. You should wire or insulate the speaker cord appropriately and then reset the unit.
Why won't my Kenwood DDX4038 detect my Bluetooth device?
If your Kenwood Monitor is not detecting a Bluetooth device, check that the Bluetooth adapter (KS-UBT1) is correctly inserted. If it is, try searching from the Bluetooth device again.
What does “Authorization Error” mean on Kenwood Monitors?
If your Kenwood Monitor displays “Authorization Error”, verify that the connected iPod/iPhone is compatible with the unit.
Why is the Bluetooth audio skipping on my Kenwood DDX4038?
If you're experiencing interrupted or skipped sound while using a Bluetooth audio player with your Kenwood Monitor, try the following: * Reduce the distance between the unit and the Bluetooth audio player. * Disconnect any device connected for Bluetooth phone use. * Turn the unit off and then back on. * If the sound is still not restored, try connecting the player again.
General
