Why can't discs be played back on my Kenwood Car Receiver?
If discs cannot be played back on your Kenwood Car Receiver: * Record the tracks using a compliant application on the appropriate discs. * Add appropriate extension codes to the file names.
Why is my Kenwood Car Receiver remote controller not working?
If the remote controller for your Kenwood Car Receiver is not working, try replacing the battery.
How to stop the sound from skipping on my Kenwood Car Receiver with Bluetooth?
If the sound is being interrupted or skipped while using a Bluetooth audio player with your Kenwood Car Receiver: 1. Reduce the distance between the unit and the Bluetooth audio player. 2. Disconnect any device connected for Bluetooth phone use. 3. Turn the unit off and then on again. 4. If the sound is still not restored, try connecting the player again.
Why won't my Bluetooth device detect my Kenwood Car Receiver?
If your Bluetooth device is not detecting the Kenwood Car Receiver: * Check whether the Bluetooth adapter (KS-UBT1) is inserted correctly. * Try searching from the Bluetooth device again.
How to fix Kenwood Car Receiver when no sound comes out of speakers?
If no sound is coming from the speakers of your Kenwood Car Receiver, first, adjust the volume to the desired level. If that doesn't work, check the cords and connections to ensure they are properly connected.
Why is there no picture on the screen of my Kenwood Car Receiver?
If no picture appears on the screen of your Kenwood Car Receiver: * Turn on the video component if it is not on. * Connect the video component correctly.
What does “No Navigation” mean on my Kenwood Car Receiver?
The “No Navigation” message on your Kenwood Car Receiver indicates that no navigation unit is connected.
Why can't my Kenwood Car Receiver play recordable or rewritable discs?
If your Kenwood Car Receiver cannot play recordable/rewritable discs: * Insert a finalized disc. * Finalize the discs with the component which you used for recording.
Why does no picture appear on the external monitor connected to my Kenwood Car Receiver?
If no picture appears on the external monitor connected to your Kenwood Car Receiver: * Connect the video cord correctly. * Select the correct input on the external monitor.
How to fix 'No Signal' error on Kenwood Car Receiver?
If your Kenwood Car Receiver displays a “No Signal” error: * Start the playback on the external component connected to AV-IN input terminal. * Check the cords and connections. * The signal input may be too weak.
General| Resolution | 800 x 480 pixels |
|---|---|
| Touch Screen | Yes |
| Bluetooth | Yes |
| USB Port | Yes |
| Radio Tuner | Yes |
| Audio Output Power | 50W x 4 |
| DVD Player | Yes |
| iPod Control | Yes |
| Navigation | No |
| AUX Input | Yes |
| CD Playback | Yes |
| Video Input | Yes |
| HDMI Input | No |
To Next Page
