Kenwood DDX7029 User Manual

English 71
p Mutes the volume during voice guidance of
the navigation system. ( On)
When turned "On", the volume level drops
for voice guidance.
q Sets a selecting method of audio source
from the Navigation system.(
Off)
"On": Allows you to select the audio
source input from the Navigation
system interface by pressing [SRC] or
selecting it on Source Select screen.
"Off": The audio source cannot be selected
using [SRC] or on Source Select
screen.
User Interface
You can set up user interface parameters.
1 Display the User Interface screen
Touch [User Interface] in the SETUP Menu
(page 64).
2 Setup each item
1
2
3
4
5
1 Selects the background to display.
"Change": Displays images entered into
this unit. Refer to <Background
Select> (page 74).
2 Enables entering or deleting of wallpaler
"images "into of from this unit.
Press to enter the USB suspend
mode, and then remove the USB device.
"Memory": Enables entering of
background images. Refer
to <Entering Background>
(page 73).
"Delete": Enables deleting of
background image entered
into this unit. Refer to
<Background Delete>
(page 73).
3 Sets whether to display the target when
touching the panel.
4 Sets the display method of the
unrecognized characters.
"On": Displays in the Russian character.
"Off": Displays in the European character.
5 Returns to the original screen.
Next page 3

Kenwood DDX7029 Specifications

General

Brand	Kenwood
Model	DDX7029
Category	Car Video System
Language	English