To Next PageTo Next Page
Need help?Do you have a question about the Kenwood DMF-3020 and is the answer not in the manual?
Digital Audio Performance| frequency response (playback mode) | 8 Hz ~ 20 kHz (± 1 dB) |
|---|---|
| signal to noise ratio (playback mode) | More than 105 dB |
| dynamic range (playback mode) | More than 94 dB |
| total harmonic distortion (1 kHz, playback mode) | Less than 0.007 % |
| analog input sensitivity / input impedance | 500 mV / 22 kΩ or more |
| analog output level / output impedance | 2.0 V / Less than 400 Ω |
| headphone output | 20 mW/32 Ω load |
| digital input (coxaial) | 0.5 Vp-p / 75 Ω |
| digital input (optical) | Wave length 660 nm, - 15 dBm ~ - 21 dBm |
| digital output (coxaial) | 0.5 Vp-p / 75 Ω |
| digital output (optical) | Wave length 660 nm, - 15 dBm ~ - 21 dBm |
General Specifications| power consumption | 18 W |
|---|---|
| dimensions (W x H x D) | 440 mm x 94 mm x 379 mm |
| weight | 4.0 kg |
Digital Audio Performance| frequency response (playback mode) | 8 Hz ~ 20 kHz (± 1 dB) |
|---|---|
| signal to noise ratio (playback mode) | More than 100 dB |
| dynamic range (playback mode) | More than 90 dB |
| total harmonic distortion (1 kHz, playback mode) | Less than 0.01 % |
| analog input sensitivity / input impedance | 500 mV / 22 kΩ or more |
| analog output level / output impedance | 2.0 V / Less than 400 Ω |
| headphone output | 20 mW/32 Ω load |
| digital input (coxaial) | 0.5 Vp-p / 75 Ω |
| digital input (optical) | Wave length 660 nm, - 15 dBm ~ - 21 dBm |
| digital output (coxaial) | 0.5 Vp-p / 75 Ω |
| digital output (optical) | Wave length 660 nm, - 15 dBm ~ - 21 dBm |
General Specifications| power consumption | 18 W |
|---|---|
| dimensions (W x H x D) | 440 mm x 94 mm x 379 mm |
| weight | 4.0 kg |
Explains the function of each button and control on the main unit's front panel.
Instructions for connecting and adjusting the volume for headphone output.
Details the unit's standby state, memory backup, and remote power-on.
Details the functions and layout of the remote control for specific models.
Details the functions and layout of the remote control for the DMF-5020 model.
Details the main microprocessor and its pin description for system control.
Provides information on the AD/DA converter and its specifications.
Explains how to access and utilize the unit's various test modes.
Instructions for resetting the microprocessor to its default state.
Guides users to a separate manual for mechanism-specific testing.
Outlines initialization steps for various functions and controls.
Details the functionality and modes associated with different switches.
Provides voltage readings for key inputs during specific operations.
