Kenwood DMX7520DABS Quick Start Guide

Connection/Installation
18
5
When connecting to an external amplifier,
connect its ground wire to the car’s chassis to
avoid damaging the unit.
Rear Audio Preout
(Left; White, Right; Red)
Front Audio Preout
(Left; White, Right; Red)
Subwoofer Preout
(Left; White, Right; Red)
6
External I/F
(DMX8020DABS only)
Maximum power supply current : 12 V = 500 mA
7
TV tuner remote output
8
This jack accepts either AV-IN (CA-C3AV;
optional accessory) or camera input.
For more information, see To set up the
camera assignment settings (P.56) in the
Instruction Manual.
9
Dashboard camera interface
Connect a Dashboard Camera DRV-N520
(optional accessory). (P.19)
10
Accessory 7: GPS Antenna
Use the supplied GPS antenna. Using the GPS
antenna other than the supplied one may
cause a drop in positioning accuracy.
11
Accessory 4: Bluetooth Microphone
12
Connect to vehicle’s steering remote harness.
Contact your KENWOOD dealer for details.
13
Rear view camera input (Yellow)
14
Front view camera/Dashboard camera
input (Yellow). See To set up the camera
assignment settings (P.56) in the
Instruction Manual.
15
Visual Output (Yellow)
Ñ Securing the USB extension cable
Secure the USB extension cable with insulating
tape or the like so that its connectors are not
disconnected.
Ñ Connecting a USB device
USB device
[2]
USB (Gray) terminal
[1] [4]
USB (Black) terminal
[1]
Accessory 2 (Black) (1 m)
[3]
Accessory 3 (Gray) (1 m)
[3] [4]
[1]
USB maximum power supply current :
DC 5 V = 1.5 A
[2]
Sold separately
[3]
See Securing the USB extension cable
(P.18).
[4]
DMX8020DABS only
Ñ Connecting an iPod/iPhone
KCA-iP103 (0.8m)
[3]
KCA-iP103 (0.8m)
[3]
iPod/iPhone
[2]
iPhone (with Apple CarPlay)
[2]
USB (Gray) terminal
[1] [5] [6]
USB (Black) terminal
[1]
Accessory 2 (Black) (1 m)
[4]
Accessory 3 (Gray) (1 m)
[4] [6]

Kenwood DMX7520DABS Specifications

General

Brand	Kenwood
Model	DMX7520DABS
Category	Monitor
Language	English