Kenwood DNX450TR User Manual

8 ñ English
Functions of the Buttons on the Front Panel
1
3
4
2
5
6
7
8
No. Name/Motion
1
Disc insert slot
• A slot to insert a disc media.
2
G (Eject)
• Ejects the disc.
• Pressing for 1 second ejects the disc forcibly.
3
s (Reset)
• If the unit or the connected unit fails to
operate properly, the unit returns to factory
settings when this button is pressed
(Instruction Manual P.107).
• If the Security Indicator (SI) function is
turned on, this indicator flashes when the
vehicle ignition is off (Instruction Manual
P. 81).
4
MENU
• Displays the Top Menu screen (Instruction
Manual P.13).
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
5
NAV
• Displays the navigation screen.
• Pressing for 1 second switches AV out
sources.
No. Name/Motion
6
Volume knob
• Turning adjusts volume up or down.
• Pressing switches attenuation of the volume
on/off.
• Pressing for 1 second displays Graphic
Equalizer screen (Instruction Manual
P.95 ).*
1
7
TEL
• Displays the Hands Free screen (Instruction
Manual P.71).
• Pressing for 1 second displays the Voice
Recognition screen. (Instruction Manual
P.74) *
2
8
microSD card slot
• A microSD card slot for upgrading the
map. For how to upgrade the map, refer to
the instruction manual of the navigation
system.
See “How to insert a microSD Card”
(P.11).
*1 The display may not switch to the Graphic
Equalizer screen in some conditions.
*2 [TEL] button can also be used to switch to
the rear view camera or turn o the display.
(Instruction Manual P.79)

Kenwood DNX450TR Specifications

General

Brand	Kenwood
Model	DNX450TR
Category	Car Navigation system
Language	English