J
Joseph HinesSep 5, 2025
Why can't I set up the high pass filter on my Kenwood DNX5350BT?
- SscottjohnsonSep 5, 2025
If you cannot set up the high pass filter, it may be because the subwoofer is not turned on. Set the subwoofer to on.
To Next PageTo Next PageWhy can't I set up the high pass filter on my Kenwood DNX5350BT?
If you cannot set up the high pass filter, it may be because the subwoofer is not turned on. Set the subwoofer to on.
What to do if my Kenwood DNX5350BT says Navigation Error?
If your Kenwood GPS displays a “Navigation Error”, it may be due to a communication error caused by severely cold temperature. Turn on the power again after warming your car interior.
Why can't I set up the subwoofer phase on my Kenwood GPS?
If you cannot set up the subwoofer phase, it may not be turned on. Set the subwoofer to on.
Why is there no output from the subwoofer on my Kenwood DNX5350BT?
If there is no output from the subwoofer, it may not be turned on. Set the subwoofer to on.
Why can't I set up the subwoofer on my Kenwood DNX5350BT?
If you cannot set up the subwoofer, it may not be turned on. Set the subwoofer to on.
What to do if my Kenwood DNX5350BT GPS displays Error 07–67?
If your Kenwood GPS displays “Error 07–67”, push the unit’s Reset button. If the message persists, contact your Kenwood dealer.
What does Hot Error mean on my Kenwood GPS?
A “Hot Error” message indicates that the internal temperature of the unit has risen to 60°C or more, activating the protection circuit. Use the unit again after it cools down.
Why does my Kenwood GPS say Read Error?
A “Read Error” message appears when the disc is dirty, so clean the disc. It can also mean that the disc is upside down, so load the disc with the labeled side up.
What does Disc Error mean on my Kenwood GPS?
A “Disc Error” message means that an unplayable disc has been inserted. Try changing the disc.
What does Mecha Error mean on my Kenwood GPS?
A “Mecha Error” indicates that the disc player is malfunctioning. Eject the disc and try inserting it again. If the error continues or the disc cannot be ejected, contact the Kenwood dealer.
General