Need help?Do you have a question about the Kenwood DP-940 and is the answer not in the manual?
General| Disc format | CD |
|---|---|
| Channels | 2 |
| Frequency Response | 2 Hz - 20 kHz |
| Dynamic range | 100 dB |
| Signal-to-Noise Ratio | 100 dB |
| Output Level | 2.0 V |
| Power Consumption | 15 W |
| Digital outputs | Optical |
Connect to the specified power supply type and route cords to avoid damage.
Ensure grounding, proper ventilation, and avoid use near water.
Operate within temperature range, away from heat, and avoid electric shock.
Never remove enclosure; keep unit away from magnetic fields.
Warnings about fire/shock hazard, not exposing to rain/moisture.
Actions for abnormal smell/smoke or damage requiring professional servicing.
Identifies main control keys like POWER, EDIT MODE, P-MODE, TIME, REPEAT.
Steps to power on, load CD, and start playback.
How to select and play specific tracks using numeric keys.
Enter PGM mode and program tracks in desired order (max 20).
How to start playback of the programmed track sequence.
How to clear tracks from the last one or clear the entire program.
How to check and replace a track in the existing program.
To Next Page
