Need help?Do you have a question about the Kenwood DP-M5540 and is the answer not in the manual?
Connect the unit only to the specified power supply type.
Route power cords to prevent damage from walking or pinching.
Ensure grounding or polarization means are not defeated.
Ensure proper ventilation by keeping unit clear of obstructions.
Keep the unit away from water and moisture to prevent shock.
Prevent objects from falling in or liquid spilling into the unit.
Do not remove the enclosure to avoid electric shock.
Turn off power and unplug cord if abnormal smell or smoke is detected.
Refer to service if cord, plug, liquid spill, or performance issues occur.
User should not attempt service beyond instructions; refer to qualified personnel.
Handle compact discs by the edges, avoid touching playing surface.
Step-by-step guide on loading discs into the magazine.
Connecting the unit to an amplifier or receiver using audio cords.
Connecting the unit to the AC outlet via the voltage selector.
Connecting to KENWOOD SYSTEM CONTROL terminals for system operation.
Function of the power switch to turn the unit on/off.
Indicates the currently selected disc number.
Lights up to show which discs are loaded.
Displays the current track number being played.
Shows elapsed time, total time, or program number.
How to play all loaded discs sequentially.
How to play a single selected CD.
How to pause and resume playback.
How to stop the current playback.
How to begin playback from a specific CD.
How to select and play a specific track from a CD.
How to fast-forward or fast-reverse within a track.
How to skip to the next track or restart the current track.
Step-by-step guide to programming playback order of tunes.
How to start playback of a programmed sequence.
How to clear the entire programmed sequence.
To Next Page
General
