Need help?Do you have a question about the Kenwood DP-M6640 and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Disc Capacity | 1 |
| Channels | 2 (stereo) |
| Frequency Response | 2 Hz - 20 kHz |
| Line Output | Yes |
| Digital Output | Optical |
| Dynamic Range | 98 dB |
| Output Level | 2V RMS |
| Weight | 4.6 kg |
Connects the CD player to an amplifier with KENWOOD SYSTEM CONTROL terminals for system operation.
Enables CCRS recording from CD to tape by connecting to a KENWOOD cassette deck's 'XS' terminal.
Instructions for inserting the two R6/AA batteries into the remote control unit.
Details on the operating range and key press intervals for the remote control.
Guidelines for handling and cleaning compact discs to prevent damage.
Warnings against using cracked, warped, or modified discs for playback.
Recommendation to store discs in their cases when not in use.
Steps to take before transporting or moving the unit.
Precautions and advice for operating the unit in conditions prone to condensation.
Statement regarding radio noise emissions compliance for Canada.
FCC compliance statement and warnings about modifications and interference.
Step-by-step guide on how to place a disc onto a tray and insert it into the magazine.
Instructions for inserting the disc magazine into the player.
Procedure for loading a single disc into the plus-1 disc tray.
How to place a disc and start playback, including disc selection.
Instructions on how to pause playback and resume it.
How to stop the current playback.
Steps to eject and remove the disc magazine from the player.
How to skip to the beginning of the next or current track.
How to fast forward or rewind within a track.
Explains how to use the TIME DISP. key to view elapsed and remaining times.
Allows playing selected tracks from up to 7 discs in a programmed sequence.
How to view the sequence of programmed tracks.
How to exit program mode and return to normal playback.
How to stop playback when in program mode.
Instructions for adding more tracks to an existing program.
Procedure for replacing a track within a programmed sequence.
How to remove tracks from the programmed sequence.
Method to clear tracks from the end of the program.
How to erase all programmed tracks.
Details on the automatic 4-second space inserted between programmed tracks.
How to set the player to repeat selected programmed tracks.
How to set the player to repeat all tracks on all loaded discs.
How to set the player to repeat only the disc in the Plus 1 Tray.
How to turn off repeat playback and return to normal mode.
Enables random selection and playing of tracks from a single disc or all discs.
How to change tracks or restart the current track during random playback.
How to stop random playback and return to normal playback.
Steps for connecting components to an audio timer for wake-up playback.
Instructions for setting up and performing timer playback.
Function to select tracks to fit a specified tape length for recording.
Procedure to edit a second disc separately after editing the first.
How to verify the tracks selected for editing and their order.
Information on recording edited programs using the CCRS function.
How to play back the edited A and B files.
How to clear all edited tracks from the player's memory.
To Next Page
