Do you have a question about the Kenwood DP-R792 and is the answer not in the manual?
frequency response | Hz~20 kHz |
---|---|
signal-to-noise ratio | More than 94 dB |
dynamic range | More than 92 dB |
channel separation | More than 90 dB at 1kHz |
output level / impedance | 1.2V/3.3 kΩ |
headphone output | DP-R4440 20 mW (16 Ω) |
power consumption | 15 W |
---|
height | DP-R792 / DP-R892 : 120 mm, DP-R4440 : 128 mm |
---|---|
width | 440 mm |
depth | 395 mm, DP-R4440 : 391 mm, 396 mm |
weight | 5.5 kg, DP-R892 / DP-R4440 : 5.6 kg |