Do you have a question about the Kenwood DPC-77 and is the answer not in the manual?
Type | Portable CD Player |
---|---|
Disc Capacity | 1 |
Digital converter | 1-bit DAC |
Frequency response | 20 Hz - 20 kHz |
Dynamic range | 90 dB |
Signal to Noise Ratio | 90 dB |
Channel separation | 85 dB |
Total harmonic distortion | 0.005% |
Digital outputs | optical |
Dimensions | 130 x 130 x 30 mm |
Weight | 0.3 kg |
Playback Formats | CD |
Channels | Stereo |
Power Requirements | DC 4.5V |
Section for recording unit's serial number for future reference.
Guide to setting the AC adaptor's voltage selector to match local mains voltage.
Environmental conditions to avoid for proper unit operation.
Handling precautions to prevent unit damage or malfunction.
Procedure to follow if abnormal smell or smoke is detected.
How to handle condensation issues affecting unit performance.
Important usage notes and safety advice for headphones.
Description of the LCD display and its information.
Controls for skipping tracks forward and backward.
Button for stopping playback and clearing memory.
Button to start, pause, and resume playback.
Button to open the disc lid.
Mechanism for accessing the disc compartment.
Connector for digital audio output.
Connector for analog audio output.
Connector for the DC power adaptor input.
Connector for headphone output.
Control for adjusting audio volume level.
Button to lock/unlock controls and reduce vibration skip.
Button for checking remaining tracks/time and entering memory.
Button to activate the high-frequency cut filter.
Button to select repeat playback modes (one track, all tracks, memory).
Button for programming tracks into memory and clearing memory.
Buttons for fast-rewinding and fast-forwarding playback.
Switch to turn the unit's power on or off.
Indicates the presence of an internal rechargeable battery.
Procedure for charging the unit's internal rechargeable battery.
Instructions for powering the unit via the AC adaptor.
Essential safety precautions related to electrical hazards.
Steps to prepare the unit and disc for playback.
Basic steps for playing a CD and controlling volume.
How to navigate tracks and fast-forward/rewind playback.
How to use repeat playback for single tracks, all tracks, or programmed tracks.
Step-by-step guide to programming desired tracks into memory.
Instructions for initiating playback of programmed tracks.
Important precautions for car audio playback.
Important precautions for using the digital output connection.
Method for cleaning the exterior casing of the unit.
Procedure for cleaning the optical lens.
Guidelines for handling and cleaning compact discs.
Details about the optical pick-up system.
Audio performance specifications like channels and frequency response.
Description of the available audio output connectors.
Description of the available power input connectors.
General information including power, battery, and dimensions.
List of included accessories with the unit.