Need help?Do you have a question about the Kenwood DPX-MP7090U and is the answer not in the manual?
FM Tuner Section| FM frequency range (50 kHz space) | 87.5 MHz – 108.0 MHz |
|---|---|
| FM frequency range (200 kHz space) | 87.9 MHz – 107.9 MHz |
| Usable sensitivity (S/N = 30dB) | 9.3dBf (0.8 μV /75 Ω) |
| Quieting Sensitivity (S/N = 50dB) | 15.2dBf (1.6 μV /75 Ω) |
| FM frequency response (±3.0 dB) | 30 Hz – 15 kHz |
| Signal to Noise ratio (MONO) | 70 dB |
| Selectivity (±400 kHz) | ≥ 80 dB |
| Stereo separation (1 kHz) | 40 dB |
AM Tuner Section| AM frequency range (9 kHz space) | 531 kHz – 1611 kHz |
|---|---|
| AM frequency range (10 kHz space) | 530 kHz – 1700 kHz |
| Usable sensitivity (S/N = 20dB) | 28 dBμ (25 μV) |
CD Player Section| Spindle speed (Audio file) | 1000 – 400 rpm (CLV 2times) |
|---|---|
| CD frequency response (±1 dB) | 10 Hz – 20 kHz |
| Total harmonic distortion (1 kHz) | 0.008 % |
| Signal to Noise ratio (1 kHz) | 110 dB |
| Dynamic range | 93 dB |
Audio Section| Maximum output power | 50 W x 4 |
|---|---|
| Full Bandwidth Power (at less than 1% THD) | 22 W x 4 |
| Speaker impedance | 4 – 8 Ω |
| Tone action Bass | 100 Hz ±8 dB |
| Tone action Middle | 1 kHz ±8 dB |
| Tone action Treble | 10 kHz ±8 dB |
| Preout level / Load (during disc play) | 5000 mV/10 kΩ |
| Preout impedance | ≤ 80 Ω |
Auxiliary Input| Auxiliary frequency response (±1 dB) | 20 Hz – 20 kHz |
|---|---|
| Input Maximum Voltage | 1200 mV |
| Input Impedance | 100 kΩ |
General| Operating voltage | 14.4 V |
|---|---|
| Current consumption | 10 A |
| Installation Size (W x H x D) | 182 x 112 x 159 mm |
| Weight | 1.64 kg |
Important warnings and precautions to prevent injury, fire, and unit damage, including laser safety.
Details on supported AAC, MP3, and WMA file formats, including bit rates and sampling frequencies.
How to turn the unit on/off, adjust volume, select sources, and use the attenuator function.
Selecting tuner source, tuning modes, and managing preset radio stations.
Instructions for playing CDs, audio files, and USB devices, including playback and removal.
Basic menu navigation and procedures for activating/deactivating the security code.
Detailed button operations for Tuner, Disc/USB, and TV sources using the remote control.
Detailed diagram illustrating connections for power, speakers, antennas, and control wires.
Solutions for common problems like no power, no sound, poor quality, and display issues.
Diagnosing and resolving issues related to radio reception, disc playback, and USB device functionality.
Explanation of system messages, error codes, and device status indicators for troubleshooting.
To Next Page
