To Next PageTo Next PageWhy is my Kenwood Car Receiver showing “MISWIRING CHECK WIRING THEN PWR ON”?
This message indicates a wiring issue. Turn off the power, ensure the speaker wire terminals are properly insulated, and then turn the power back on.
Why are correct characters not displayed on my Kenwood Car Receiver?
If correct characters are not displayed on your Kenwood Car Receiver (e.g. album name), note that this unit can only display uppercase letters, numbers, and a limited number of symbols. Depending on the display language you have selected, some characters may not be displayed correctly.
Why is there no sound from my Kenwood DPX702BH Car Receiver?
If you cannot hear any sound from your Kenwood Car Receiver, make sure the volume is properly adjusted. Also, check the cords and connections to ensure they are correctly connected.
What does 'DEVICE FULL' mean on my Kenwood DPX702BH?
If your Kenwood Car Receiver displays “DEVICE FULL”, the number of registered devices has reached its limit. Retry after deleting an unnecessary device.
What does “PROTECTING SEND SERVICE” mean on my Kenwood DPX702BH Car Receiver?
The message “PROTECTING SEND SERVICE” indicates that the unit requires servicing. Send the unit to the nearest service center.
Why is my Kenwood DPX702BH Car Receiver showing “DEVICE FULL”?
If your Kenwood Car Receiver displays “DEVICE FULL”, the number of registered devices has reached its limit. Delete an unnecessary device and try again.
Why is my Kenwood DPX702BH Car Receiver not detecting Bluetooth devices?
If your Kenwood Car Receiver is not detecting Bluetooth devices: * Search from the Bluetooth device again. * Reset the unit.
Why can't I pair my Kenwood Car Receiver with Bluetooth?
If you are unable to pair your Kenwood Car Receiver with a Bluetooth device: * Make sure you have entered the same PIN code on both the unit and the Bluetooth device. * Delete pairing information from both the unit and the Bluetooth device, then perform pairing again.
How to fix echo during phone calls on my Kenwood Car Receiver?
If you hear echo or noise during a phone conversation on your Kenwood Car Receiver: * Adjust the microphone unit’s position. * Check the [ECHO CANCEL] setting.
How to improve phone sound quality on my Kenwood DPX702BH Car Receiver?
To improve phone sound quality on your Kenwood Car Receiver: * Reduce the distance between the unit and the Bluetooth device. * Move the car to a place where you can get a better signal reception.
General| Bluetooth | Yes |
|---|---|
| Display Type | LCD |
| Radio Tuner | AM/FM |
| Subwoofer Preamp RCA Output | Yes |
| CD Player | Yes |
| DIN Size | Double DIN |
| Power Output (RMS) | 22 watts |
| Peak Power Output | 50 watts x 4 channels |
| USB Input | Front |
| Compatible Formats | MP3, WMA, AAC |
| Equalizer | 13-band |
| Preamp RCA Outputs | 3 Pairs |
| Preamp Voltage | 4V |
| Satellite Radio Ready | SiriusXM Ready |
| AUX Input | Front |
| iPod and iPhone Compatibility | Yes |
| Android Compatibility | Yes |
| Steering Wheel Control Compatibility | Yes |
Details FCC regulations, potential interference, and user steps to mitigate it.
Explains compliance with FCC/IC radiation exposure limits and recommended installation distance.
Emphasizes reading the manual, safety warnings, and operational cautions before use.
Advises against distracting operations and proper volume setting for safety.
Guides on turning the unit on/off, adjusting volume, and selecting audio sources.
Details how to connect USB storage, iPod, and Android devices for playback.
Covers playback, pause, seeking, track/folder selection, repeat, and random play functions.
Guides on connecting the microphone and pairing Bluetooth devices for the first time.
Explains automatic pairing for specific devices and managing multiple connections.
Guides on receiving, answering, rejecting, and ending calls via Bluetooth.
Covers handling multiple calls, swapping calls, and switching between talk modes.
Explains how to adjust voice quality, auto-answer, and battery/signal display.
Guides on making calls using call history, phonebook, and number dial features.
Explains how to use voice recognition to initiate calls and control phone functions.
Guides on storing and erasing contacts in memory for quick dialing.
Details settings like device selection, PIN code, reconnection, auto-pairing, and initialization.
Details playback, navigation, repeat, and random play functions for Bluetooth audio.
Details settings for subwoofer, manual EQ, bass extend, and preset equalizers.
Covers settings for loudness, subwoofer, fader, balance, volume offset, and sound effects.
Details speaker size selection and crossover frequency/gain adjustments for tweeters and subwoofers.
Addresses issues like no sound, wiring errors, service messages, and poor radio reception.
Provides solutions for disc errors, no device detected, file errors, and iPod/Android specific issues.
Solutions for playback errors, connection issues, and device support for Pandora and Android.
Addresses common SiriusXM issues like antenna, tuner connection, subscription, and content errors.
Solutions for issues like no device detected, failed pairing, and echo/noise during calls.
Addresses poor sound quality, voice recognition errors, audio interruptions, and device control problems.
Provides critical safety warnings and a step-by-step guide for installing the unit.
Step-by-step instructions for mounting the unit into a standard dashboard.
Details connections for power, speakers, outputs, microphone, and USB.
