Do you have a question about the Kenwood EZ500 and is the answer not in the manual?
frequency range | 87.9MHz~107.9MHz |
---|---|
usable sensitivity | 9.3dBf (0.8µV/75Ω) |
quieting sensitivity | 15.2dBf (1.6µV/75Ω) |
frequency response | 30Hz~15kHz |
signal to noise ratio (MONO) | 70dB |
selectivity | ≥80dB |
stereo separation | 40dB |
maximum output power | 50W x 4 |
---|---|
full bandwidth power | 22W x 4 |
frequency range | 530kHz~1700kHz |
usable sensitivity | 28dBµ (25µV) |
preout level/load | 2000mV/10kΩ |
---|---|
preout impedance | ≤600Ω |
spindle speed | 1000~400 rpm (CLV 2 times) |
frequency response | 10Hz~20kHz |
total harmonic distortion | 0.01% |
operating voltage | 14.4V |
---|---|
current consumption | 10A |
installation size | 178 x 50 x 160 mm |
weight | 2.87 lbs (1.3 kg) |