EasyManua.ls Logo

Kenwood FP910 series - User Manual

Kenwood FP910 series
76 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK
www.kenwoodworld.com
56222/4

Table of Contents

Other manuals for Kenwood FP910 series

Preview: Instructions
Instructions14 pages

Questions and Answers

  • S
    Scott HarveyJul 31, 2025
    Why my Kenwood FP910 will not operate?
    • D
      David LopezJul 31, 2025
      If your Kenwood Food Processor won't operate, start by ensuring it's properly plugged into a power source. If the indicator light isn't on, this is the first thing to check. Next, verify that the bowl is correctly locked into place, with the handle situated on the right-hand side. Also, make sure the lid is securely locked, ensuring the lid interlock aligns correctly with the handle area. Finally, if these steps don't resolve the issue, check the fuse or circuit breaker in your home.
  • B
    Bryan TaylorAug 9, 2025
    What to do if my Kenwood FP910 stops during processing?
    • J
      Jeffrey WrightAug 9, 2025
      If your Kenwood Food Processor stops during processing, it could be due to overloading or exceeding the maximum capacity. Refer to the 'to use your food processor' section for maximum capacity guidelines. Also, ensure that the lid is locked correctly.
  • P
    phyllisowensAug 20, 2025
    Why Kenwood FP910 liquidiser/mill will not operate?
    • A
      allenchadAug 21, 2025
      If your Kenwood Food Processor liquidiser/mill won't operate, ensure you're using the correct base. The mill base isn't interchangeable with the FP920/FP930 liquidiser jug. The processor won't operate if the wrong base is fitted. Check that the graphic on the base matches the jug you are using.

Summary

Safety and Initial Setup

Before Using for the First Time

Steps for initial preparation before first use, including washing parts.

Key Components Identification

Using Attachments and Controls

Food Processor Operation

Step-by-step guide on fitting components and using the processor controls.

Using the Liquidiser

FP910 Liquidiser Operation

Steps for fitting and operating the FP910 liquidiser with usage hints.

FP920;FP930 Liquidiser Operation

Guide to assembly, use, filler cap positions, and important notes for FP920/FP930.

Using Various Attachments

Knife Blade and Dough Tool Usage

Cutting Disc Safety and Operation

Safety precautions and step-by-step guide for using cutting discs with pushers.

Using the Mill and Citrus Press

Mill Components and Safety

Mill Operation and Hints

Using Mini Processor and Juicer

Mini Processor Bowl Usage

Centrifugal Juicer Operation

Storage, Cleaning, and Service

Cleaning Instructions

Detailed steps for cleaning the liquidiser/mill, whisk, and other parts.

Troubleshooting Guide

Processor Not Operating

Troubleshooting steps for when the processor has no power or indicator light.

Liquidiser;Mill Not Operating

Solutions for when the liquidiser or mill will not operate, including base compatibility.

Processor Stops During Processing

Kenwood FP910 series Specifications

General IconGeneral
BrandKenwood
ModelFP910 series
CategoryFood Processor
LanguageEnglish

Related product manuals