What does it mean when the Power On light is flashing rapidly on my Kenwood FPM800 Food Processor?
A rapidly flashing Power On light on your Kenwood Food Processor indicates that the bowl, lid, or blender are not correctly fitted to the power unit or not locked in place properly. To fix this, check that all interlocks are engaged correctly.
Why is the Auto and Power On light flashing on my Kenwood FPM800 Food Processor?
If both the Auto and Power On lights are flashing on your Kenwood Food Processor, it means that the Auto function is selected, but the interlocks are not engaged. To resolve this, ensure that all interlocks are engaged correctly, or press the Auto button to switch off the Auto function.
What to do if Kenwood FPM800 will not operate?
If your Kenwood Food Processor isn't operating, there could be several reasons: * **Power:** Ensure the processor is plugged in and that there is power. Check if the power indicator light is lit. * **Bowl and Lid:** Make sure the bowl is correctly fitted to the power unit with the handle towards the right, and that the lid is locked on correctly, with the lid interlock properly located in the handle area. The processor won't work if these parts are incorrectly fitted. * **Eco Function:** Press either the Auto Button or turn the speed control on, then return it to ‘O’ to switch off the Eco function. * **Fuse/Circuit Breaker:** If none of the above steps work, check the fuse or circuit breaker in your home.
How to fix Kenwood Blender leaking from blade assembly base?
If your Kenwood Blender is leaking from the blade assembly base, it could be due to a missing, incorrectly fitted, or damaged seal. Check that the seal is fitted correctly and is not damaged.
Why Kenwood Food Processor Power On light flashing slowly?
If the Power On light on your Kenwood Food Processor is flashing slowly, it indicates that the appliance has been left plugged in for over 30 minutes without being operated and has entered Eco mode. To switch off the Eco function, press either the Auto Button or turn the speed control on and then return it to ‘O’.
Why Kenwood Blender will not operate?
If your Kenwood Blender won't operate, it could be due to incorrect fitting or assembly. The blender will not operate if fitted incorrectly to the interlock. Also, ensure the blade unit is fully tightened into the goblet.
Why Kenwood Food Processor stops during processing?
Your Kenwood Food Processor might stop or slow down during processing due to overload protection being activated. This can happen if the processor is overloaded, overheated, or if the maximum capacity has been exceeded. To resolve this, switch off and unplug the appliance, then allow it to cool down for approximately 15 minutes. Refer to the speed chart to ensure you are not exceeding the maximum capacities for processing.
General| Brand | Kenwood |
|---|---|
| Model | FPM800 series |
| Category | Food Processor |
| Language | English |
To Next Page
