Kenwood TYPE FPM25 - User Manual

Questions and Answers

B
badamsAug 9, 2025
Why Kenwood TYPE FPM25 Food Processor won't operate?
- M
  Mario EllisAug 9, 2025
  Your Kenwood Food Processor might not be operating due to several reasons. First, ensure the processor is properly plugged into a power source. Second, check that the bowl is correctly fitted to the power unit, with the handle situated on the right-hand side. Finally, verify that the bowl lid is securely locked. The processor is designed not to start if the bowl and lid are not correctly in place. If these steps don't resolve the issue, inspect the fuse or circuit breaker in your home.
K
Kristin DuncanAug 16, 2025
Why is my Kenwood Food Processor liquidiser/mill not working?
- B
  Benjamin RobinsonAug 16, 2025
  The Kenwood Food Processor liquidiser or mill may not operate if it is incorrectly fitted to the interlock or not assembled correctly. Ensure the liquidiser or mill is correctly attached. Also, check that the blade unit is fully tightened into the goblet or jar.
A
Alexander MooreAug 25, 2025
What to do if Kenwood TYPE FPM25 Food Processor stops during processing?
- C
  christinadavisAug 25, 2025
  If your Kenwood Food Processor stops during processing, it may be overloaded or have exceeded its maximum capacity. Refer to the recommended speed chart to ensure you are within the stated limits. Also, verify that the lid is correctly and securely locked in place.
D
davisanitaAug 31, 2025
What to do if Kenwood TYPE FPM25 Food Processor liquidiser/mill is leaking?
- K
  Kyle WilliamsAug 31, 2025
  If your Kenwood Food Processor liquidiser or mill is leaking from the blade assembly base, it could be due to a missing, incorrectly fitted, or damaged seal. Check the seal to ensure it is correctly fitted and undamaged. To get a replacement seal you should follow the instructions in the “service & customer care” section.