What to do if my Kenwood FDP65 Food Processor will not operate?
If your Kenwood Food Processor won't operate, first check if it's properly plugged in and has power. Then, ensure the bowl is correctly fitted to the power unit, with the handle situated towards the right front hand corner. Finally, verify that the lid interlock is correctly located into the handle area. The processor will not work if the bowl and lid are fitted incorrectly.
Why isn't my Kenwood Food Processor Blender, Blend-Xtract 2GO or mill working?
The Blender, Blend-Xtract 2GO, or mill might not be operating because it's not correctly locked on. Ensure it is correctly fitted to the interlock. Also, check that the blade assembly is fully tightened into the bottle or jar.
What to do if my Kenwood FDP65 Blend-Xtract 2GO or multi mill is leaking?
If your Kenwood Food Processor Blend-Xtract 2GO or multi mill is leaking from the blade assembly base, check the seal. Make sure the seal is fitted correctly and is not damaged.
Why does my Kenwood FDP65 stop during processing?
Your Kenwood Food Processor might stop during processing due to overloading, exceeding maximum capacities, or an unlocked lid. Refer to the recommended usage chart to verify you haven't exceeded maximum capacities. Also, ensure the lid is correctly locked.
General| Power | 1000W |
|---|---|
| Material | Plastic |
| Pulse Function | Yes |
| Dishwasher Safe Parts | Yes |
| Capacity - blender | 1.5L |
| Accessories | Dough tool, Whisk |
| Bowl Capacity | 3L |
Describes fitting the detachable drive shaft and bowl onto the power unit for assembly.
Explains how to fit an attachment over the bowl drive shaft before adding ingredients.
Details fitting the lid, ensuring proper location, and using the feed tube.
Instructions on plugging in, selecting speed, and using the pulse control for operation.
Describes the procedure for safely removing the lid, attachments, and bowl after use.
Cautionary advice on handling sharp blades and cutting discs with care.
Key rules: Do not exceed times, capacities, or process hot ingredients.
Details processing functions, recommended speeds, times, and capacities for various attachments.
Lists causes and solutions for the processor failing to operate.
Lists causes and solutions for blender or mill attachments not operating.
To Next Page