Kenwood FDP30 - User Manual

Questions and Answers

M
Melissa JarvisAug 15, 2025
What to do if my Kenwood Food Processor will not operate?
- J
  James LevineAug 15, 2025
  If your Kenwood Food Processor isn't operating, first, ensure it's properly plugged in. Next, check that the bowl is correctly located with the handle towards the right front. Also, verify the lid interlock is correctly placed into the handle area, as the processor won't work if the bowl and lid aren't fitted properly. Finally, if none of these steps work, check the fuse or circuit breaker in your home.
B
Benjamin Taylor Jr.Aug 18, 2025
Why does my Kenwood Food Processor stop during processing?
- F
  franciscolewisAug 18, 2025
  Your Kenwood Food Processor might stop during processing for a couple of reasons. It could be overloaded or exceeding maximum capacities—check the recommended speed chart for guidance. Alternatively, the lid may be unlocked; ensure it's locked correctly before operating.
W
Walter BrownAug 21, 2025
How to fix a Kenwood FDP30 Food Processor blender or mill that will not operate?
- N
  newmanaustinAug 22, 2025
  If the blender or mill of your Kenwood Food Processor isn't operating, it might not be locked on correctly. Also, ensure the blade assembly is fully tightened into the goblet or jar, as the blender or mill won't operate if incorrectly fitted to the interlock.
D
Dawn PalmerAug 25, 2025
What to do if my Kenwood Blender processor stops during processing?
- S
  Scott NguyenAug 26, 2025
  If your Kenwood Blender processor stops during processing, it might be overloaded or exceeding maximum capacities. Refer to the usage chart for maximum capacities. Also, ensure the lid is locked correctly.
J
Jimmy TurnerAug 28, 2025
Why is my Kenwood Blender leaking from the blade?
- N
  nortonrachelAug 28, 2025
  If your Kenwood Blender or multi mill is leaking from the blade assembly base, check if the seal is fitted correctly and isn't damaged. If you need a replacement seal, refer to ‘Service and customer care.’
J
Jennifer NovakAug 31, 2025
What to do if my Kenwood Food Processor blender is leaking from the blade assembly base?
- A
  Anthony StevensonAug 31, 2025
  If your Kenwood Food Processor blender or mini chopper/mill is leaking from the blade assembly base, check that the seal is correctly fitted and not damaged.
B
billy62Sep 4, 2025
What to do if my Kenwood Blender will not operate?
- S
  Sheryl BrownSep 4, 2025
  If your Kenwood Blender or mill will not operate, it may not be locked on correctly or assembled properly. Ensure it is correctly fitted to the interlock. Check that the blade assembly is fully tightened into the goblet/jar.
E
emma73Sep 7, 2025
Why will my Kenwood Blender processor not operate?
- K
  kylebrooksSep 7, 2025
  If the Kenwood Blender processor will not operate, first check that it is plugged in and has power. Then, check that the bowl is located correctly with the handle towards the right front hand corner, and that the lid interlock is correctly located into the handle area. The processor will not work if the bowl and lid are fitted incorrectly. Finally, ensure the detachable drive shaft is fitted onto the power unit before fitting the bowl; the tools and attachments will not operate without it. If none of these steps work, check the fuse/circuit breaker in your home.
S
Sierra VincentSep 10, 2025
How to fix unstable movement in my Kenwood Blender?
- P
  pbarnettSep 12, 2025
  If your Kenwood Blender unit is unstable with heavy vibrations and movement, especially when processing sticky ingredients like dates, try using 'Pulse' first to break down the ingredients. Then, continue processing on maximum speed for best results.